im crying i want it!!!!!
#1
****ty Tune= Low #'s
Thread Starter
im crying i want it!!!!!
http://cgi.ebay.com/ebaymotors/ws/eB...category=46098
that looks so good i only can dream that it was under my hood
that looks so good i only can dream that it was under my hood
#7
I like it too... however, for street use... I dont like the idea that is a direct set up.... no intercooler.... too much hot air into your engine. Direct set up is best in drag racing...
I prefer this set up.
I prefer this set up.
Trending Topics
#8
I can has a Hemi? Yes...
iTrader: (2)
Originally Posted by ssglopezvm
I like it too... however, for street use... I dont like the idea that is a direct set up.... no intercooler.... too much hot air into your engine. Direct set up is best in drag racing...
It can easily be modified to adapt one in.
Also, I am curious as to how much power your 12A Turbo has put
down on a dyno. Any Track times too?
Real nice, clean setup.
#9
Originally Posted by Directfreak
Nice.. But that setup comes from factory without an Intercooler.
It can easily be modified to adapt one in.
Also, I am curious as to how much power your 12A Turbo has put
down on a dyno. Any Track times too?
Real nice, clean setup.
It can easily be modified to adapt one in.
Also, I am curious as to how much power your 12A Turbo has put
down on a dyno. Any Track times too?
Real nice, clean setup.
Dyno #s: 236rwhp @ 10PSI
No track numbers.....street use only
#13
Nigga stole my bike!
Join Date: Oct 2002
Location: Des Allemands, Louisiana
Posts: 1,154
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Supper
am I one of the only FB guys that isn't caught up in the whole turbo thing?
yeah it would be nice, but I rather enjoy the FB's as they are right now.
yeah it would be nice, but I rather enjoy the FB's as they are right now.
I'll just stick with my streetport for now.....
#15
Rotary Enthusiast
Join Date: Jun 2003
Location: Calgary; AB
Posts: 1,288
Likes: 0
Received 0 Likes
on
0 Posts
my engine looks like that...although the paint is not that shiny...maybe I should haul her out and paint it with metallic paint...20b would be nice but its way...way too much work for just one person to do alone!!!
#18
How About A Cup Of STFU
Join Date: Sep 2004
Location: ALBANY, GA
Posts: 1,552
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by clean85owner
I'm not caught up in the "turbo thing", but I am rather caught up in "supercharger thing."
#22
love the braaaap
I've had a ride in a modded 10th AE FC before and let me tell ya, that thing pulled like a mother. I can only imagine what that engine would be like in a 1st gen.
#23
Darth Suppah
Join Date: Jul 2004
Location: So dubbed by teh Poops!
Posts: 515
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by coldy13
Drive a FB with a turbo and I bet you'll never say that again
Nothing quite like feeling those trucks spool while towing trailers.
Especially the duramax.
#24
mazdaspeed 3 coming soon
Join Date: Jul 2001
Location: Mississauga, Ontario
Posts: 1,761
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Supper
am I one of the only FB guys that isn't caught up in the whole turbo thing?
yeah it would be nice, but I rather enjoy the FB's as they are right now.
yeah it would be nice, but I rather enjoy the FB's as they are right now.
#25
Originally Posted by MaX PoWeR
ssglopezvm
Hay where do u get thoes mods fopr that 12a turbo of yours? any website i can look at?
Hay where do u get thoes mods fopr that 12a turbo of yours? any website i can look at?
Mostly fabricated.....
Check out my Website or read this.
The first thing you need to do is to rebuilt and mildly port the engine.
There is NO Turbo kit for 12A's.... You need to fabricate. Is really simple....
To fabricate a Turbo manifold......first, get a 12A exhaust Flange from Racing Beat also get the gasket.
Second.... go to EBAY.COM and get this 13B Turbo Manifold(93-95 RX7): http://cgi.ebay.com/ebaymotors/ws/eB...category=33742
Next.... Cut the tip/corners of the 13b flange bolt holes..... place the new 12A flange ON TOP and TIG WELD it..... See this picture: (
Finally... get the Turbo and Wastegate.
For the Turbo.... I got a medium size one ( Garrett T4E, .60 compressor, .69 Turbine, P Trim ) I paid about 500 for it.
NOTE: YOU MUST port ( at least ...mild street porting ) your engine.
Entire budget is about $1,700 by doing it yourself.... and over $3,500 if done at a shop.
You will get around 250 horse power at the wheels @ 10 PSI Boost ( with selected Turbo and mild street porting)
LIST:
Exhaust Flange
Exhaust Gasket
13B Turbo Manifold (to fabricate to a 12A Turbo Manifold)
T4 Turbo w bolts, oil line, return line & gaskets
HKS WASTEGATE with gasket
Blow off valve
Intercooler with 2 1/2 inch alluminum pipping & silicone hoses
Boost controler ( Turbonetics 10 PSI MAX )
Boost gauge
Heat/exhaust wrap and Cover
Holley Carburetor options (390CFM, 450CFM, 600CFM or 650CFM)
If carburetor/holley... Turbonetics carburetor cover/hat (blow thru)
If carburetor/holley... use Racing Beat Intake Manifold ( PORTED )
Air Filter ( K&N or Aftermarket )
3 " Downpipe with presilencer & good muffler
a new fuel pump and Regulator (Holley has good pumps/ should push at least 16 to 25 psi )
Fuel / Air Gauge(llean/rich) and sensor ( make sure that the SENSOR is at least 4 " from turbo on downpipe )
optional: Turbo timer
optional: Electric dual fans