idle fixed now need help
05-23-05, 12:28 PM
#1
Slide Or Die
Thread Starter
iTrader: (3)
Join Date: May 2004
Location: Dayton, OH
Posts: 1,076
Likes: 0
Received 0 Likes
on
0 Posts
idle fixed now need help
well i adjusted the 2 screws on the side of my nikki.. and now she idles good.. so i sprayed around for vaccum leaks and i didnt find any so i decided to take her for a test drive.. she has ok power if you are full throttle.. but everything else seems like she cant even get out of her own way.. she doesnt buck like she used to but its like a constant bog.. i also switched out the white plug for the blue one for my only solenoid left after the rats nest removal..which wasnt much of a removal since i only had 2 solenoids to begin with.. but anyways.. any help would be great..
05-23-05, 12:35 PM
#2
1983 GSL, 1987 323 "GX"
Join Date: Jun 2004
Location: Las Cruces, NM
Posts: 2,265
Likes: 0
Received 0 Likes
on
0 Posts
Were you following the normal Nest removal guide for the S2/3 cars? Maybe there's something that you have to do different for your SA (I know the dizzy is different for one thing)
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM