I Passed My Smog Test!!! Yay!!!!!
#1
emissions r teh sux
Thread Starter
iTrader: (2)
Join Date: Dec 2005
Location: Stockton Ca
Posts: 888
Likes: 0
Received 0 Likes
on
0 Posts
I Passed My Smog Test!!! Yay!!!!!
i went to the smog station the other day and ran a pre test and once it passed i ran the real test. I will scan and post the results later. really didn't think that i would pass either... first carbed car i've had and after the carb rebuild i wasn't sure the mixture was right... but i did it.
#4
emissions r teh sux
Thread Starter
iTrader: (2)
Join Date: Dec 2005
Location: Stockton Ca
Posts: 888
Likes: 0
Received 0 Likes
on
0 Posts
well.....my scanner decided not to work with win xp sooooo.....i will type my smog results for my 12a
15 mph : RPM 1967 %CO2 = 14.2 %O2 = 0.3 HC = Max 152/ave 45/meas 139 CO = max 1.05/ave 0.16/meas 0.27 NO = max 1191/ave 434/meas 49 result = Pass
25 mph : RPM 2148 %CO2 = 14.3 %O2 = 0.2 HC = Max 123/ave 33/meas 100 CO = max 0.85/ave 0.14/meas 0.37 NO = max 1021/ave 357/meas 49 result = Pass
15 mph : RPM 1967 %CO2 = 14.2 %O2 = 0.3 HC = Max 152/ave 45/meas 139 CO = max 1.05/ave 0.16/meas 0.27 NO = max 1191/ave 434/meas 49 result = Pass
25 mph : RPM 2148 %CO2 = 14.3 %O2 = 0.2 HC = Max 123/ave 33/meas 100 CO = max 0.85/ave 0.14/meas 0.37 NO = max 1021/ave 357/meas 49 result = Pass
#5
My wife bought me 2 RX-7s
Join Date: Aug 2001
Location: Saskatoon, Saskatchewan, Canada
Posts: 2,328
Likes: 0
Received 2 Likes
on
2 Posts
Very good indeed!
Glad to see a nicely running 7. It's interesting, if Mazda could come up with a way to improve the thermal efficiency of the rotary, it'd be a VERY clean engine. Aside from the hydrocarbons, your measurements were nowhere near the maximum allowed.
Glad to see a nicely running 7. It's interesting, if Mazda could come up with a way to improve the thermal efficiency of the rotary, it'd be a VERY clean engine. Aside from the hydrocarbons, your measurements were nowhere near the maximum allowed.
Thread
Thread Starter
Forum
Replies
Last Post
AMOC
SE RX-7 Forum
1
09-10-15 09:42 AM
rx8volks
Canadian Forum
0
09-01-15 11:02 PM