How to: starter wiring
09-24-11, 02:53 PM
#1
No pistons baby
Thread Starter
Join Date: Feb 2011
Location: Edmonton, Alberta, Canada
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
How to: starter wiring
I had trouble recently figuring out where my starter wiring went. Figured it out, and I've received other questions about it, so I made a sketch that hopefully is clear enough for everyone to understand. Can the rotary gods check this for me - is this correct?
Let me know if something should be made clearer, I'd like this to be a useful reference.
Cheers
Let me know if something should be made clearer, I'd like this to be a useful reference.
Cheers
09-24-11, 06:52 PM
#2
Senior Member
iTrader: (1)
Join Date: Aug 2010
Location: Southern Minnesota and Southern California
Posts: 340
Likes: 0
Received 0 Likes
on
0 Posts
Hey Buddy,
Nice work on the sketch. Yesterday I wired it up just like in your sketch and it worked. Thanks a lot for getting back to me. I was having difficulty because I didn't know about the negative wire from the battery. I also didn't realise that that one wire is grounded twice - once to the strut tower and once to the starter bolt that you mentioned.
I think your diagram is pretty clear. Thanks again. Good luck.
Chris
Nice work on the sketch. Yesterday I wired it up just like in your sketch and it worked. Thanks a lot for getting back to me. I was having difficulty because I didn't know about the negative wire from the battery. I also didn't realise that that one wire is grounded twice - once to the strut tower and once to the starter bolt that you mentioned.
I think your diagram is pretty clear. Thanks again. Good luck.
Chris
Thread
Thread Starter
Forum
Replies
Last Post
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 01:54 PM
Adaptronic 1280s Hot Start 3 Rotor 20b RX7
Monsterbox
Adaptronic Engine Mgmt - AUS
5
09-11-15 03:29 PM