how much power am i making?
#1
Will Work for Beer
Thread Starter
Join Date: Apr 2003
Location: Lincoln, Ne
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
how much power am i making?
well heres what i've done to my 84 gsl-se. take a guess. i'll be geting it dynoed in a month or so. when i have the money.
-88 n/a 13b
-custom intake. bassically i made a free flowing cone filter setup.
-EGR removed
-Air pump removed
-ACV removed
-rats nest crap removed
-racing beat header with a cherry bomb turbo II muffler welded on right after the header. then 2.5 inch back to a muffler(yet to be determined)
-Power steering removed(due to the fact that when i picked it up the pully fell out of the pump)
-the exhaust has been heat raped and treated
-the intake pluming has been raped as well the keep the air away from the heat.
-eletric fan
-ran by a 84 gsl-se ecu
-secondary injector holes on the intake were pluged up.
-84 front cover and dizzy
-84 vacum switches(took forever to sort this out)
-84 sensors(throtlle posistion, oil preasure sender, water temps, air temps, AMF)
-84 oil pan and filter
-lightened flywheel
the only real upgrades were the custom intake, custom exhaust, all the crap removed.
what do you think? what kinda power?
-88 n/a 13b
-custom intake. bassically i made a free flowing cone filter setup.
-EGR removed
-Air pump removed
-ACV removed
-rats nest crap removed
-racing beat header with a cherry bomb turbo II muffler welded on right after the header. then 2.5 inch back to a muffler(yet to be determined)
-Power steering removed(due to the fact that when i picked it up the pully fell out of the pump)
-the exhaust has been heat raped and treated
-the intake pluming has been raped as well the keep the air away from the heat.
-eletric fan
-ran by a 84 gsl-se ecu
-secondary injector holes on the intake were pluged up.
-84 front cover and dizzy
-84 vacum switches(took forever to sort this out)
-84 sensors(throtlle posistion, oil preasure sender, water temps, air temps, AMF)
-84 oil pan and filter
-lightened flywheel
the only real upgrades were the custom intake, custom exhaust, all the crap removed.
what do you think? what kinda power?
#5
Will Work for Beer
Thread Starter
Join Date: Apr 2003
Location: Lincoln, Ne
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
keep in mind it's an 88 13b so stock it makes 146 hp i believe.
check it here
http://www.petting-zoo.net/~gkm/rx7/specs.html
check it here
http://www.petting-zoo.net/~gkm/rx7/specs.html
Trending Topics
#9
I can has a Hemi? Yes...
iTrader: (2)
Re: how much power am i making?
Originally posted by 13B4port
what do you think? what kinda power?
what do you think? what kinda power?
Well it's not ported. The intake you made could go either way +/- as for power output. The stock 88 where rated for 146 FLYWHEEL HP. The headers help.
I say 120 REAR-WHEEL HP, - Max.
On an stock port 13B, that wouldnt be bad at all.
#10
Will Work for Beer
Thread Starter
Join Date: Apr 2003
Location: Lincoln, Ne
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
you're saying between the engine and the wheel there is a 10%- 15% power loss for our cars? ok my question is how much do you think i'm makin at the flywheel then?
#11
Will Work for Beer
Thread Starter
Join Date: Apr 2003
Location: Lincoln, Ne
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 13B4port
so take a new guess guys. the heat RAP helped a lot. i sugust you guys try it. it's cheep. one role of 1in X 15ft did it for me
so take a new guess guys. the heat RAP helped a lot. i sugust you guys try it. it's cheep. one role of 1in X 15ft did it for me
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM