can someone quickly tell me how much gear lube goes in the tranny and the LSD rear end and how the hell to get it in the tranny?

 

Well, Little Lady....

First you to the local auto-supply house, or a Sears, and get yourself a gear-oil pump. It's a plastic pump and tubing that will allow you to pump the gear-oil into the trans and rearend. If I'm you, I'm gonna get some synthetic gear-oil. You're going to need a 3/8 ratchet, and a socket to fit the drain plug. Get at least 4 quarts of oil. Pump the oil into the fill holes until it reaches the top of the fill hole...Same with the rearend. The 3/8 socket shaft of the ratchet will fit the square plug holes.

Denny,
From the 'ol corncrib......

 

tilt the car on its side. pour in.

seriously, make sure you get the in plug off before the out plug. that way if the in plug is stuck you don't drain your fluid and get stuck. as for quantities, get a haynes manual. you need this anyway.

 

Hey Denny, I love the new Avatar... hehe!

 

I've got the quantities: the LSD rear axle takes 1.7 qts and the manual transmission takes 2.1 qts, while the automatic takes 7.9 qts.

 

thanks Denny, but I am not a girl.... stupid that my girlfriend helped me get a name.... grr... how can i change it??
help was appreciated

 

Thanx smnc....

Hotty....So Sorry, honest mistake....
Go to your personal info to make the change...

Denny,
From the 'ol corncrib...