How to: Make you're own muffler.
#51
well here the pictures of where I'm at with the back one. Not bad of a job if I might say. I should hopefully be finishing it up sometime this week.
Here's a couple shots of the flanges that I also welded up on the other muffler. These are from Vibrant, 3/8" thick 304 stainless. As you can see I welded front and back just incase.
Here's a couple shots of the flanges that I also welded up on the other muffler. These are from Vibrant, 3/8" thick 304 stainless. As you can see I welded front and back just incase.
#59
well its all set to go now. Next wednesday I've booked some time at a shop to have it all put together. This time it will all be mandrel bent tubing and all TIG welded and I'll be supervising the whole thing closely. I would do it myself but for me to do it would take alot longer without a hoist, and since this is my daily driver time is always of the essense with it.
Forgot to mention that trying to scream into the back one defintaly takes out quite a bit of sound. (kids don't try this at home, your lungs could hurt trying to replicate a rotary engine by mounth lol)
Forgot to mention that trying to scream into the back one defintaly takes out quite a bit of sound. (kids don't try this at home, your lungs could hurt trying to replicate a rotary engine by mounth lol)
#63
Well took some decibel numbers of the system that is on the car now and the read outs are as follow:
Without the silencer: ~116.5 decibel
With the silencer: ~112.5 decibels
Considering every 3 decibels is half the noise, thats not bad for just some home made silencers.
I'm hoping to be under 110 decibels after the new stuff ... that might be optimistic, but even if i can reach to about the same level as with the silencers I'll be happy. I'm still going to make some fancy silencers.
The car did go in the shop today, and i hacked up all the old stuff, i'll post up pictures later.
Without the silencer: ~116.5 decibel
With the silencer: ~112.5 decibels
Considering every 3 decibels is half the noise, thats not bad for just some home made silencers.
I'm hoping to be under 110 decibels after the new stuff ... that might be optimistic, but even if i can reach to about the same level as with the silencers I'll be happy. I'm still going to make some fancy silencers.
The car did go in the shop today, and i hacked up all the old stuff, i'll post up pictures later.
#64
Just for reference, here's a couple numbers from my rental (a toyota Yaris), and my dad's car (02 civic)
Yaris: ~ 85 Decibel
Civic: ~88 Decibel
These are both stock cars, that are pretty much ultra quiet to my standards. I think if I got something with a V8 stock of some sort, or something that had a mild exhaust on there, it would be about mid 90's in decibel.
Yaris: ~ 85 Decibel
Civic: ~88 Decibel
These are both stock cars, that are pretty much ultra quiet to my standards. I think if I got something with a V8 stock of some sort, or something that had a mild exhaust on there, it would be about mid 90's in decibel.
#67
I personaly don't care too much most of the time neither, but the neighbourghs do. The only time it can get to me is on long trips, like I did last year going down to florida. But thats about it.
Anyways today everything got pretty much tacked on, tomorrow everything will be coming apart to be purged and welded, here's a little teaser though
Anyways today everything got pretty much tacked on, tomorrow everything will be coming apart to be purged and welded, here's a little teaser though
#75
Ya I really hope so, I can't just quite jump on the dyno yet though to see power difference because I still need to retune the engine on the street first and also i need to change my water pump that is wobbling at the pulley, but hopefully within a couple of weeks ill be on there.