rx7 punk

Im looking into buying yet another rx7, this will be my first 1st gen but 3rd rx7, anywho I have an excellent junkyard closeby where I could get my hands on a new fuse box. The 1 st gen Im about to go look at was damaged by someone messing with the battery, my question to you is would the problem with the electrical be limited to the fuse box under the hood or am I looking at fried wires throughout the car? thanks

Dan_s_young

iTrader: (1)

The swap is very easy it takes about 5 minutes if you have the fusebox and mount in your hands. Just solder the wires in.

rx7 punk

But I dont have to worry about the rest of the electrical system being fried?

Zyrano

it's hard to tell from that, you can go to the junk yard, grab some new fuseible links (grab extras, just to make sure you have some that works) go to the damaged car, and plug them in to see if it makes any difference. (make sure to check for other shorts first). it's hard to tell without knowing some of the symtoms of the car. or, maybe bring a volt meter and see if there is a resistance on the existing links on the car. it's possible other parts of the electrical is damaged (i mean, was the guy cutting wires or what?)

rx7 punk

idk he just said his dad was messing with the battery, let me try to contact him.

riceburner1r2001

iTrader: (4)

i hope u know that fuses will go in the stock fusible links as red in other areas n the forum. i was going to go to the 2g fuses but when i found out u didnt have to it was great. nothing to cut .