how hard is it to conver to power windows? it looks like the window switches are already wired in, in my 83gs...what do i all need to convert?im asking because tomorrow i am going to go buy some seats out of a 85 and it also has mint door panels but are power and mine are manual so i figured why not just convert . well thanks for reading and maby u can help ... also i already searched but nothing came up

 

You need the switch and pigtail, the door harness for each door, the power regulators and the door panels are different. If you don't want to change the door panels, find a plug for hole.

 

It is an easy conversion, mine already had the wires routed in the door, I just needed the switch and motor/regulator assemblies. However, unlike the manual windows, the power do NOT go all the way down, there is a small part of the glass that sticks up. My driver door needed adjustment (the upper frame was out about 1/8in) to work but other than that it was painless. I paid about 50$ for the regulators/motors for both doors, shipped. I paid 75$ for the switch (go figure) from ebay.

I am redoing my door panels, so no biggie there either.

Scott