Holly carb problems
#1
I'm in rotary heaven!
Thread Starter
Join Date: Dec 2006
Location: jax
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
Holly carb problems
I got my car running well with the 600 cfm now and after driving it for about a month i'm noticing some problems.
When I make a sharp left or right turn i'm guessing the float gets moved up and dont let in any fuel, making the engine run lean. So far this is a real problem for me since I like to scca autocross and i'll be dead in every turn.
I saw racing beat has a cure for this problem but i'm not going to spend what they want.
I was wondering if the downdraft webbers have this problem?
When I make a sharp left or right turn i'm guessing the float gets moved up and dont let in any fuel, making the engine run lean. So far this is a real problem for me since I like to scca autocross and i'll be dead in every turn.
I saw racing beat has a cure for this problem but i'm not going to spend what they want.
I was wondering if the downdraft webbers have this problem?
#2
No distributor? No thanks
iTrader: (6)
Join Date: Oct 2003
Location: Outskirts of Road Atlanta
Posts: 3,438
Likes: 0
Received 6 Likes
on
4 Posts
No, the problem is unique to the holley. You can get some center-hung floats (buy the kit from summit, jegs, etc) but the problem is native to a holley. When you turn left, all the fuel takes the crossover tube to overfill the secondary bowl and leave your primaries dry. The two-barrels don't have the same problem.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM