what do i need to be able to properly put a holley 600 on a stock intake? what do i need to get?

 

A holly 600 will be useless on a stock intake. I read that the stock intake mani was flowtested, and it only flows ~330 cfm, which is still too small for the stock nikki. Just order the kit from RB (if you have either a bp 12a or a sp 13b, get the tuning kit, and you'll be good). If you have an otherwise stock motor, don't go with a 600 because it'll be a bear to tune, you'll get horrible gas mileage, and be very displeased with your car.

some more info on your mods etc. would help out people tremendously

 

You will make a lot less power with a holley/adapter plate/stock manifold as either a full holley or nikki setup.

 

yea get the rb intake manifold and rock out. i figured out the "trick" to get a 600 to work on a stockport 12a. if you're serious, send me a pm.