Help Vaccum Line!
#1
Full Member
Thread Starter
Join Date: Feb 2007
Location: australia
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Help Vaccum Line!
I need to add a T peice into the vac line to go into the intake, I have a 13 B carby can some one tell me how to find it. (i know a noob question) thanks!!
#4
Old Fart Young at Heart
iTrader: (6)
Iirc, all of your S4 engines were FI, so it has been converted to a carby. What do you need the vac line for? Most of the aftermarket carb/intake setups have vac nipple on the intake mani. If nothing else, post a pic of the intake and the Mazda logo cast into the housings on the left side of the engine.
#7
Old Fart Young at Heart
iTrader: (6)
Guessing that that maybe an old Hitachi carb, Jeff should be able to tell for sure. If so, it should have plastic base plate with vacuum ports on the left side of the carb base. Easiest way to tell is take a pic looking straight down the carb from the top.
If this isn't a Mazda carb, then what is it? If it isn't, then you'll need to find or tap a port in the intake.
I hate playing Dentist and pulling teeth. Try to provide more and as much info as you can without me having to keep asking.
If this isn't a Mazda carb, then what is it? If it isn't, then you'll need to find or tap a port in the intake.
I hate playing Dentist and pulling teeth. Try to provide more and as much info as you can without me having to keep asking.
Thread
Thread Starter
Forum
Replies
Last Post
t-von
3rd Generation Specific (1993-2002)
9
09-10-15 01:56 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM