Help, got a Dome light Issue
07-08-04, 04:57 PM
#1
Full Member
Thread Starter
Join Date: Jul 2004
Location: Kitchener, Ont. Canada
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
Help, got a Dome light Issue
Alright here's a quick and small Question
But it drives me Nuts
The car was gone in for Work one time, came out needed more then What it went in for, and the Rear view Mirror was hanging with the Light cover on the seat????
How does that Mirror saty up there????? One side is cracked on the Light cover btu that's it, and No my mirror is only good at stops, bounces around to much to use while Driving.
At the wrecker I always glance I've only seen one with the Dome light cover!!!!!!And it was a nasty SCREW Job!!!!
On Second thought Ignore Line ONE!!
But it drives me Nuts
The car was gone in for Work one time, came out needed more then What it went in for, and the Rear view Mirror was hanging with the Light cover on the seat????
How does that Mirror saty up there????? One side is cracked on the Light cover btu that's it, and No my mirror is only good at stops, bounces around to much to use while Driving.
At the wrecker I always glance I've only seen one with the Dome light cover!!!!!!And it was a nasty SCREW Job!!!!
On Second thought Ignore Line ONE!!
07-08-04, 05:01 PM
#2
/_\ Rotarized /_\
Join Date: Jun 2004
Location: Grand Prairie, TX
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
Well, if it's anything like mine, there's two screws that hold it in..... assuming you're talking about the entire assembly came down... but it should be pretty obvious how it stays there.
And before anyone else asks, why didn't you get the shop to fix it since they broke it?
And before anyone else asks, why didn't you get the shop to fix it since they broke it?
07-08-04, 08:13 PM
#3
Full Member
Join Date: Oct 2003
Location: CALGARY, AB
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
duh
when I first bought my rx7 the rear view mirror was dangling as well. I drove it for a whole month thinking that it was busted or something. So finally I got pissed off enough one day and used a little muscle and pushed up on it and the rear view mirror snapped up in place fine! 
07-08-04, 09:43 PM
#4
So little time and money
Join Date: Feb 2003
Location: NorCAL
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
When I bought the GSL-SE, it didn't have a dome light cover. The mirror will attatch to the roof in a certain notch. Play around and use a bit of muscle, it'll "click" and then it should stay put.
07-09-04, 08:31 AM
#5
Senior Member
Join Date: Jan 2004
Location: Hickory,North Carolina
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
Hmm...Wonder if I should try that to mine.
When I bought my -SE the mirror cover is off (in the console) and the rear view mirror is held in place against the windsheild with some rubber tubing....
Works, but looks ghetto.
When I bought my -SE the mirror cover is off (in the console) and the rear view mirror is held in place against the windsheild with some rubber tubing....
Works, but looks ghetto.
07-10-04, 09:22 AM
#6
Full Member
Join Date: Jan 2004
Location: Daphne, AL
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
My mirror "fell out" one day when I tried to adjust it. I took the whole assembly down, with the plan to JB weld the mirror back on. Got it on the table and realized it could snap back in. Snapped back in and stayed.
