Heater fan woes....
01-25-04, 10:50 AM
#1
Rotary Enthusiast
Thread Starter
Heater fan woes....
Hey guys, whattya think?
on my '85, when I turn the fan for the heater on, you can hear the blower going at full speed, but only a whisper of air to comes out of the vents... possible blockage? Do these things have finicky blend doors?
Dan
on my '85, when I turn the fan for the heater on, you can hear the blower going at full speed, but only a whisper of air to comes out of the vents... possible blockage? Do these things have finicky blend doors?
Dan
01-25-04, 02:38 PM
#4
Senior Member
Are the blend doors on the RX7's controlled by Vacuum Acuators, Electric Acuators or are they Cable operated?
That would make a huge difference on diagnosis.
I have a ALL Data system and i could pull up some tests if you like. What year is it??
That would make a huge difference on diagnosis.
I have a ALL Data system and i could pull up some tests if you like. What year is it??
01-26-04, 01:31 AM
#7
Right near Malloy
iTrader: (28)
Join Date: Dec 1999
Location: Behind a workbench, repairing FC Electronics.
Posts: 7,841
Received 510 Likes
on
345 Posts
There were two versions of the control for the blend doors on these cars...
One had a Sliding **** for the Vent, Floor, Defrost selection... Those were obviously cable actuated.
The other version has push buttons. These are electrically actuated.
One had a Sliding **** for the Vent, Floor, Defrost selection... Those were obviously cable actuated.
The other version has push buttons. These are electrically actuated.
Thread
Thread Starter
Forum
Replies
Last Post
