I wanna remove that whole assembly from my parts car cause it seems to be in good shape. Any tips? The dash is **** so I can sawzall that out of the way if need be, but I don't wanna damage the heater box or any of the wiring associated with it. Any advise is good. TIA

 

i removed all of mine for weight savings...didnt hurt anything, its just a lot of tedious work. there's a few screws up top you gotta unscrew, then disconnect the heater lines and push it through, then i dragged it over to the passenger side and lifted it out. it was the last thing to go however...i pulled out the blower and a/c crap first. you wont have to cut anything, and it will all be useable, just really pissy work under that dash...