gslse weber setup
#2
FD > FB > FC
I am running a weber (built by rotaryshack) on a 6 port 13B. Basically without even tuning the carb I ran a 15.6 at the track. I am expected to get down to a 14.5 ish once the carb is tuned, ON A STOCK PORT.
In short you can rip a stock GSL-SE a new one with a weber on it. Its worth every penney.
In short you can rip a stock GSL-SE a new one with a weber on it. Its worth every penney.
#4
Ryan
Originally Posted by 84stock
Is anyone running the weber setup on a 6port 13b?? If so, how much difference did you see?
PM my buddy SSRs.
We did this conversion about 4-5 months ago.
It has a 4prt manifold thou so we used the adapter from Jonny @ powerhouse. To put it on.
I wonder if there would be a BIG difference between that and the RB lower manifold.
-Ryan
Thread
Thread Starter
Forum
Replies
Last Post
Wicked93gs
2nd Generation Specific (1986-1992)
42
10-07-15 11:58 PM
killerrx710
Adaptronic Engine Mgmt - AUS
5
09-28-15 09:13 AM
killerrx710
2nd Generation Specific (1986-1992)
1
09-24-15 10:57 PM