gsl-se rearend
Thread Starter
Full Member
Joined: Nov 2003
Posts: 64
Likes: 0
From: NM
gsl-se rearend
My dirvers side rearend was sagging and I replaced the springs and still have a sagging problem. Does any one have any ideas of what else I can try to correct this problem. I also have new racingbeat springs in the front.
Originally Posted by AZSE
My dirvers side rearend was sagging and I replaced the springs and still have a sagging problem. Does any one have any ideas of what else I can try to correct this problem. I also have new racingbeat springs in the front.
are you sure its the rear? Usually, if its uneven, you have to shim the cartridge in the front struts.
paradox
Joined: Oct 2002
Posts: 1,296
Likes: 2
From: SoCal
Most 1st gens tend to have this lower on the drivers side rear uneveness.
Easy fix would be these shims/spacer: http://www.mazdatrix.com/getprice.as...m=34-0130-1011
Easy fix would be these shims/spacer: http://www.mazdatrix.com/getprice.as...m=34-0130-1011
