GSl-SE and GSl LSD differences?
#1
506 RWHP 12A..
Thread Starter
GSl-SE and GSl LSD differences?
OK, so im a little curious. I have a LSD rear end WITH ventilated disc brakes, and LSD. Im guessing GLS-SE. What i basically want to know is, are there any differences from GLS-SE and GSL? I know axle lenghts are different, but is the LSD the same unit? Do the axles use the same splining?
#3
Stu-Tron Get Yo Groove On
iTrader: (4)
GSL-SE LSD's have 3 clutch plates and the GSL's have 4 IIRC. Different rear end gear ratios and depending on what year GSL you get, the axles will have smaller bearings . All -SE's came with Big bearing axles. All GSL's came in 4x110, -SE's in 4x114.3
Hope that helps
Hope that helps
#4
Senior Member
Join Date: Apr 2005
Location: Melbourne Australia / Pomona CA 91766
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
All the info is here =
https://www.rx7club.com/1st-gen-archive-71/drivetrain-lsd-shot-need-rebuild-kit-581550/
The only difference is the LSD side gears , GSL-SE / S-3 = 26 spline & S-2 small axle = 24 spline !
https://www.rx7club.com/1st-gen-archive-71/drivetrain-lsd-shot-need-rebuild-kit-581550/
The only difference is the LSD side gears , GSL-SE / S-3 = 26 spline & S-2 small axle = 24 spline !
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM