1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

gsl-se fuel pump

Thread Tools
 
Search this Thread
 
Old Aug 22, 2005 | 12:02 PM
  #1  
riceburner1r2001's Avatar
Thread Starter
Rotary Freak
Tenured Member 05 Years
iTrader: (4)
 
Joined: Nov 2003
Posts: 1,758
Likes: 0
From: riverside county
Talking gsl-se fuel pump

i am running carb now and am having probs with it. i would like to see pictures of your aftermarket pumps. it is carby btw. the one i have now is the 2nd 1 and it ran fine for awhile but when it gets hot after driving it will stall and have to wait till it get cold again, pump that is. Ty for showing me your pictures
Reply
Old Aug 22, 2005 | 12:08 PM
  #2  
1984se's Avatar
Ryan
Tenured Member 15 Years
 
Joined: Mar 2003
Posts: 1,534
Likes: 0
From: Los Angeles, Ca 323/213/818/626
You should get a Purolator one. Same thing as Facuet. What carb did you get btw.

-Ryan
Reply
Old Aug 22, 2005 | 12:19 PM
  #3  
riceburner1r2001's Avatar
Thread Starter
Rotary Freak
Tenured Member 05 Years
iTrader: (4)
 
Joined: Nov 2003
Posts: 1,758
Likes: 0
From: riverside county
some cheapo that i payed 40 for but was fine for awhile and this 1 did the same thing
Reply
Old Aug 22, 2005 | 12:20 PM
  #4  
riceburner1r2001's Avatar
Thread Starter
Rotary Freak
Tenured Member 05 Years
iTrader: (4)
 
Joined: Nov 2003
Posts: 1,758
Likes: 0
From: riverside county
oh i have a dellorot 48 that i need to rebuild
Reply
Old Aug 22, 2005 | 04:29 PM
  #5  
riceburner1r2001's Avatar
Thread Starter
Rotary Freak
Tenured Member 05 Years
iTrader: (4)
 
Joined: Nov 2003
Posts: 1,758
Likes: 0
From: riverside county
bump
Reply
Old Aug 23, 2005 | 01:57 AM
  #6  
riceburner1r2001's Avatar
Thread Starter
Rotary Freak
Tenured Member 05 Years
iTrader: (4)
 
Joined: Nov 2003
Posts: 1,758
Likes: 0
From: riverside county
bump
Reply
Old Sep 2, 2005 | 08:59 PM
  #7  
aspirao's Avatar
Senior Member
Tenured Member: 20 Years
Liked
 
Joined: Aug 2005
Posts: 327
Likes: 3
From: PR/Maine/Ga/SC
get a holley blue
Reply
Old Sep 2, 2005 | 10:51 PM
  #8  
Paradox's Avatar
backyard tuner
Tenured Member 10 Years
iTrader: (1)
 
Joined: Sep 2002
Posts: 1,265
Likes: 0
From: BC, Canada
your SE pump is overheating because its trying to overwork the fuel system, you'll just keep burning out SE pumps using low pressure like that. get a holley pump or something thats meant to be used with a carb.

i tried the SE pump on my holley setup with no luck, probably for the best anyways. im running a holley red now.
Reply
Old Sep 2, 2005 | 10:54 PM
  #9  
RoadRaceJosh's Avatar
Hobby or mental illness?
Tenured Member 10 Years
 
Joined: Sep 2004
Posts: 478
Likes: 0
From: SW Washington
If you have the high pressure pump you need a low pressure bypass regulator like the Mallory 4307. Dead-head regulators will burn up the pump! I know bypass regulators aren't cheap, but it's either a good regulator or a low pressure pump.
http://www.centuryperformance.com/de...t_id=MAL-4307m
Reply
Old Sep 3, 2005 | 07:59 AM
  #10  
64mgb's Avatar
Go Hawks!
iTrader: (1)
 
Joined: May 2004
Posts: 1,952
Likes: 3
From: Cedar Rapids, Iowa
Here's my Mallory installation:

http://85rx7.home.mchsi.com/85rx7_20050824.html

Rich
Reply
Old Sep 3, 2005 | 08:19 AM
  #11  
riceburner1r2001's Avatar
Thread Starter
Rotary Freak
Tenured Member 05 Years
iTrader: (4)
 
Joined: Nov 2003
Posts: 1,758
Likes: 0
From: riverside county
can i see the install of the pressure reg and i have a holley regulator if that is good enough with i will be installing a holley red
Reply
Old Sep 3, 2005 | 08:24 AM
  #12  
64mgb's Avatar
Go Hawks!
iTrader: (1)
 
Joined: May 2004
Posts: 1,952
Likes: 3
From: Cedar Rapids, Iowa
Originally Posted by riceburner1r2001
can i see the install of the pressure reg and i have a holley regulator if that is good enough with i will be installing a holley red
The motor is not in the car yet, and I have not installed the regulator yet, but here's a picture of what I'm thinking about doing.

Rich
Attached Thumbnails gsl-se fuel pump-20050902_006a.jpg  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
Rotospectre
New Member RX-7 Technical
3
Mar 28, 2018 03:33 PM
ChrisRX8PR
Single Turbo RX-7's
21
Oct 18, 2015 04:01 PM




All times are GMT -5. The time now is 11:46 PM.