GSL-SE cleaned injectors - now it dies
02-06-05, 10:49 AM
#1
Rotary Enthusiast
Thread Starter
iTrader: (1)
Join Date: Aug 2003
Location: NJ
Posts: 1,171
Likes: 0
Received 0 Likes
on
0 Posts
GSL-SE cleaned injectors - now it dies
i had the injectors cleaned and i recently reinstalled them...it is such a nice day today so I decided I'd test out the injectors...
well I turn her over and she turns on just fine...but it just dies...if i keep it up around 3 - 4 k rpm it stays on but pretty rough...i'm thinking since i recently had the injectors cleaned that it might be fuel delivery...maybe the wiring to the injectors needs replacing since the old ones cracked a little upon removing the old injectors and i had to put them on half clipped...
i've read before where the injector wiring was replaced...where can i get that?
well I turn her over and she turns on just fine...but it just dies...if i keep it up around 3 - 4 k rpm it stays on but pretty rough...i'm thinking since i recently had the injectors cleaned that it might be fuel delivery...maybe the wiring to the injectors needs replacing since the old ones cracked a little upon removing the old injectors and i had to put them on half clipped...
i've read before where the injector wiring was replaced...where can i get that?
02-06-05, 10:54 AM
#3
Rotary Enthusiast
Thread Starter
iTrader: (1)
Join Date: Aug 2003
Location: NJ
Posts: 1,171
Likes: 0
Received 0 Likes
on
0 Posts
hahaha damn you are fast! anyways...i'm sure its the wiring...the clips broke coming out...so it might be running on 1 injector...
update: i found that they are made by Borg-Warner...does anyone have the part number so i can order it online somewhere?
update: i found that they are made by Borg-Warner...does anyone have the part number so i can order it online somewhere?
Last edited by bizarro; 02-06-05 at 11:12 AM.
02-06-05, 01:47 PM
#5
Rotary Enthusiast
Thread Starter
iTrader: (1)
Join Date: Aug 2003
Location: NJ
Posts: 1,171
Likes: 0
Received 0 Likes
on
0 Posts
well what do ya know...turned out to be 2 things...
1. bacv leak (fixed with new gasket)
2. bacv i bought recently isn't working right...put my old one which i suspect is out of tune hence why i got another and now its working right...
1. bacv leak (fixed with new gasket)
2. bacv i bought recently isn't working right...put my old one which i suspect is out of tune hence why i got another and now its working right...
Thread
Thread Starter
Forum
Replies
Last Post
LunchboxSA22
2nd Generation Specific (1986-1992)
37
10-26-15 10:53 AM
