I have a Gsl rear end, the guy i bought it off of cut teh brake hose that goes from the chassis tot eh distribution block on the rear end... i took it off and got the correct thread pitch and such went to Autozone and bought the one with the proper thread... but its going to be to short, when looking online there is another that is longer but the thread pitch on the male end is wrong.. i climbed under the car with teh new one and it seems like it is going to be too short does anyone know the proper part number?

the one i bought http://www.autozone.com/autozone/par...8069_7559_4107

The one that is longer but wrong pitch on male end
http://www.autozone.com/autozone/par...8069_5285_4107

 

Mazda Factory Part No: FA07-43-820

But a stainless braided alternative can be purchased from Re-Speed for $30 + shipping
http://mrcmfg.com/catalog/product_in...roducts_id=357

Rock Auto has them under Brake -> Hydraulic Hose -> "Rear Disc Brakes" and look for "Rear Lower" for about $7 + shipping
http://www.rockauto.com/

 

http://www.autozone.com/autozone/par...mString=search

measure how long you need it... russel makes steel braided as well just need two adapters thats what i did.. ordered it from my work Autozone...