85mazdarx7

i have both wiring harnesses just need to know what i need to keep and scrap so i can get my car running again, pictures or diagrams would be awesome

mazdaverx713b

iTrader: (91)

did you convert a GS to 13B using the EGI engine from the SE? if so, you use the complete front SE wiring harness behind the dash up to the heater controls. the harness splits off and you can retain your stock GS harness as the SE harness will plug into that. the SE harness is used throughout the engine bay and to the rear of the car into the storage bins. from there, there is another large connector similar to the one near the heater controls. keep your GS's rear wiring harness and plug the SE harness into the GS's rear harness. i did the SE swap on my ocen blue 85 GS. here is the thread..including plenty of pics that may help you with your swap: https://www.rx7club.com/build-threads-293/85-l6-gs-se-project-restoration-822222/

if you need further explanation or pics or a parts list for the conversion let me know and i'll send the list yor way.