1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

good news for me

Thread Tools
 
Search this Thread
 
Old Sep 12, 2003 | 12:03 PM
  #1  
rawze's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 12
Likes: 0
From: maryville-tn
Thumbs up good news for me

Well I bought a near perfect base 85 to put another engine in because I was told the engine was bad. I decided to check it out before I pulled the engine and come to find out it has real good compression but no clutch pressure. I stripped the rats nest and am putting on an rb manifold and edelbrock carb. Also, a new clutch master and slave. For 450 I got a near perfect car no rust and great interior, not bad.
Reply
Old Sep 12, 2003 | 12:24 PM
  #2  
Atkins Dan's Avatar
Former Site Sponsor
 
Joined: Aug 2003
Posts: 4,368
Likes: 0
From: Tacoma WA
That is a sweet deal on someones ignorance that you got a good rx-7. dan
Reply
Old Sep 12, 2003 | 01:17 PM
  #3  
V8kilr's Avatar
Rotary Freak
Tenured Member 10 Years
 
Joined: Apr 2001
Posts: 2,441
Likes: 5
From: Troy,Mi
got this one for $450 as well.







had to do an auto 2 manual swap, get fuel injectors balanced, new manifold gaskets and front brake pads

Car has like new compression, I honestly think the motor was rebuilt before I got it, I will know when I port it.
Reply
Old Sep 12, 2003 | 01:20 PM
  #4  
pillage6's Avatar
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Nov 2002
Posts: 1,060
Likes: 2
From: Jax, FL
Sucks that you pulled the motor before you checked compression.

Nice finds!!
Reply
Old Sep 12, 2003 | 01:24 PM
  #5  
AdrenalifeRX7's Avatar
Are you gonna shift?!
Tenured Member 15 Years
 
Joined: Dec 2002
Posts: 602
Likes: 0
From: Rochester, NY
I wish I could find those kind of deals around here.
Reply
Old Sep 12, 2003 | 01:28 PM
  #6  
V8kilr's Avatar
Rotary Freak
Tenured Member 10 Years
 
Joined: Apr 2001
Posts: 2,441
Likes: 5
From: Troy,Mi
Originally posted by pillage6
Sucks that you pulled the motor before you checked compression.

Nice finds!!
I never pulled the motor, I just like to port my motors and the GTU will be under the knife sooner or later
Reply
Old Sep 12, 2003 | 01:37 PM
  #7  
V8kilr's Avatar
Rotary Freak
Tenured Member 10 Years
 
Joined: Apr 2001
Posts: 2,441
Likes: 5
From: Troy,Mi
BTW heres an even better one,

which reminds me that I forgot to put the write up on how to disable the fuel cut relay on my site.

anyway, I bought this one for $300 as a donor, maybe it was $350
Engine wouldnt start, I tried a couple times and noticed 2 things

1 when I tapped the gas it would sound worse when turning over
2 no loud *** fuel pump

so I told the guy I would be back to pick it up and when I got there I paid him, hopped under the dash, cut one wire without taking off any panels, took about 1 maybe 2 minutes, cranked for a couple minutes, fired up and drove it home





Reply
Old Sep 12, 2003 | 01:37 PM
  #8  
V8kilr's Avatar
Rotary Freak
Tenured Member 10 Years
 
Joined: Apr 2001
Posts: 2,441
Likes: 5
From: Troy,Mi
woops, double post,

BTW the se suspension did not come on the car, and it is not an se

its a fully loaded "power steering and all" GSL
Reply
Old Sep 12, 2003 | 02:26 PM
  #9  
ZachstylezRX7's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Jun 2003
Posts: 382
Likes: 0
From: Bellingham, WA
LOL i wonder what the guy was thinking! Did he say anything after you made him look like an idiot?

Zachstylez
Reply
Old Sep 12, 2003 | 02:35 PM
  #10  
[FLaT]'s Avatar
Full Member
Tenured Member 05 Years
 
Joined: Mar 2003
Posts: 106
Likes: 0
From: Los Angeles
Yeah, That guy must feel pretty bad. BTW what wire did you cut?
Reply
Old Sep 13, 2003 | 07:13 AM
  #11  
V8kilr's Avatar
Rotary Freak
Tenured Member 10 Years
 
Joined: Apr 2001
Posts: 2,441
Likes: 5
From: Troy,Mi
Originally posted by ZachstylezRX7
LOL i wonder what the guy was thinking! Did he say anything after you made him look like an idiot?

Zachstylez
looked kinda disapointed, but throughout the whole deal he had that shitty grin on his face like he had one up on me.

he didnt say anything, he just ent back inside the shop where i picked it up at
Reply
Old Sep 13, 2003 | 07:14 AM
  #12  
V8kilr's Avatar
Rotary Freak
Tenured Member 10 Years
 
Joined: Apr 2001
Posts: 2,441
Likes: 5
From: Troy,Mi
Originally posted by [FLaT]
Yeah, That guy must feel pretty bad. BTW what wire did you cut?
I will probably start on the write up today

check my link in my sig, it will be in the articles section
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cristoDathird
Introduce yourself
28
May 30, 2019 08:47 PM
cam_7779
2nd Generation Specific (1986-1992)
9
Aug 18, 2015 07:48 AM
7aull
1st Gen General Discussion
4
Aug 14, 2015 10:44 PM




All times are GMT -5. The time now is 09:44 PM.