Glass moon roof
Somehow, one of the metal peices that the front clip thingies screw into which hold the clips onto the class has fallen off (I guess I was going to fast). Anyways, where can I get one of these peices at? Does anybody here have one I can have?
Thanks,
lindr6
Thanks,
lindr6
you're prolly better off my looking for another moonroof from a junkyard or sumthing. but if anything go to www.mazdtrix.com
they'd be the best bet.
Josh
they'd be the best bet.
Josh
Victoria British carries all the hardware for Sun/Moon roofs. You can order a catalog by logging on to (www.victoriabritish.com)
Junior Member
Joined: Jan 2002
Posts: 44
Likes: 0
From: national city ca
How in the hell do you lose the hardware that holds the moonroof on
the car,,while it's on the car ?? both kinds of roofs use the same
bracket on the front,that slip in one of the two attaching points.the
metal use screws,while the glass roofs use bolts that go all the way through the glass,,local hardware store has carraige bolts,use a carraige
bolt,put some silicon on both sides of the hole(s)then put the bolt through
the glass,the silicon acts as a buffer for the metal bolt to the glass,and
weather proofs as well,,i'd say use a nylock nut,,any threads showing
after the nut should be trimmed,so roof will close all the way down
the car,,while it's on the car ?? both kinds of roofs use the same
bracket on the front,that slip in one of the two attaching points.the
metal use screws,while the glass roofs use bolts that go all the way through the glass,,local hardware store has carraige bolts,use a carraige
bolt,put some silicon on both sides of the hole(s)then put the bolt through
the glass,the silicon acts as a buffer for the metal bolt to the glass,and
weather proofs as well,,i'd say use a nylock nut,,any threads showing
after the nut should be trimmed,so roof will close all the way down
Thread
Thread Starter
Forum
Replies
Last Post







