1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

getting my 79 sa back tommorrow

Thread Tools
 
Search this Thread
 
Old Nov 15, 2005 | 09:28 PM
  #1  
robs_seven's Avatar
Thread Starter
Got Rotors?
Tenured Member 05 Years
iTrader: (1)
 
Joined: Jul 2005
Posts: 856
Likes: 0
From: Statesville, NC
getting my 79 sa back tommorrow

Well my 79 sa has been down at rotorsports racing, the guys down there have redone all my fuel line, pump and put in a fuel regulator, and tuned the carb and everything and timed it. i got everything as far as i could and just could not get it to run long and sound right so they did it for me and tied up some loose ends. im going to pick it up tommorrow. its still not driveable since the rear brakes are stuck some what so there is still some work, but im so excited about it. this was my first rebuild and it was ground up, blown motor, everythng rusted together and been sitting since like 88' nothing was in good shape. well i got it for FREE from my neighbor and decided to fix it. stripped it down and went back with a rebuild 12A rotorsports stage 3 and went with a nice streetport. got a RB ported intake with holley 465cfm, then went with RB hi-perf ported headers and full exhaust. got a lightweight flywheel, street strip clutch, duel pulleys, new electronic distributor, rebuild the tranny, and rearend. and now its going together. i got to do the brakes but other then that its running. its been in the works for a couple years so its about time, just excited and had to tell somebody LOL,

so with all that what you guys or gals think i will be putting to the rear wheels???, not sure what to expect and how well its going to be on the road???? i plan early next year to redo the suspension and then paint it over the summer.

i plan on get some pics and vid soon but till then take it easy
robert.
Reply
Old Nov 16, 2005 | 02:37 PM
  #2  
rbf41182gt's Avatar
Rotary Enthusiast
Tenured Member: 20 Years
 
Joined: Jun 2004
Posts: 1,081
Likes: 2
From: Richmond, VA
sounds awsome! I couldn't wait to get my car back to my house either. (i did all the bodywork w/ my grandfather at his house) Driving it is probably the most fun thing in the world I have done. Have fun with yours! It's gonna be a rocket! those mods look pretty good. I would guess 175 to the wheels.
Reply
Old Nov 16, 2005 | 05:38 PM
  #3  
robs_seven's Avatar
Thread Starter
Got Rotors?
Tenured Member 05 Years
iTrader: (1)
 
Joined: Jul 2005
Posts: 856
Likes: 0
From: Statesville, NC
ITS HOME, well i would love to have that hp, i still have some work to do, still think the tank has junk in it and got to do some little things but it sounds GOOD, thanks go out to all the guys at Rotor Sports Racing that worked on it and putting up with my old car. well ill get some pics and hopfully if its running good maybe some vid or sound, damn im excited, well back out to the garage
Reply
Old Nov 16, 2005 | 05:40 PM
  #4  
rotor vs. piston's Avatar
Function > Form
Tenured Member 15 Years
 
Joined: Nov 2002
Posts: 10,890
Likes: 3
From: Catonsville MD (baltimore suburb)
ahem, pics?
Reply
Old Nov 16, 2005 | 06:48 PM
  #5  
rbf41182gt's Avatar
Rotary Enthusiast
Tenured Member: 20 Years
 
Joined: Jun 2004
Posts: 1,081
Likes: 2
From: Richmond, VA
yeah lets see it!
Reply
Old Nov 17, 2005 | 03:59 AM
  #6  
robs_seven's Avatar
Thread Starter
Got Rotors?
Tenured Member 05 Years
iTrader: (1)
 
Joined: Jul 2005
Posts: 856
Likes: 0
From: Statesville, NC
yeah itll be this weekend before pics my mom took my digital camera to work and has to remeber to get it back, and hopfully if i can figure out my expensive dvd camcorder some vid. im still getting trash in my fuel filter any suggestions on where to get a tank???????????
Reply
Old Nov 17, 2005 | 08:25 PM
  #7  
robs_seven's Avatar
Thread Starter
Got Rotors?
Tenured Member 05 Years
iTrader: (1)
 
Joined: Jul 2005
Posts: 856
Likes: 0
From: Statesville, NC
well if any one ever is looking to get their tank cleaned just go to a radiator shop they can boil them out. im taking my tank tommorow to get fixed and they only charge 50 bucks. well just thought i would let everyone know what was going on and im still wanting to get it back together befre i get any pics.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cristoDathird
Introduce yourself
28
May 30, 2019 08:47 PM
Th0m4s
Build Threads
25
Feb 26, 2019 02:04 AM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
lt1_rx7
Blue Ridge Rotary Run
46
Oct 9, 2015 03:11 PM
CaptainKRM
2nd Generation Specific (1986-1992)
14
Aug 26, 2015 09:52 PM




All times are GMT -5. The time now is 01:42 PM.