fuel sending unit output
#1
Newbie
Thread Starter
Join Date: Apr 2005
Location: houston, tx
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
fuel sending unit output
i'm looking to do a full cluster of aftermarket gauges in my 79, but am not sure what the output is on the fuel sending unit. my options in the gauges i'm looking at are:
empty/full (ohms)
0/90
73/8-12
240/33
0/30
16/158
if i'm looking at completely wrong gauges, please let me know. thanks.
empty/full (ohms)
0/90
73/8-12
240/33
0/30
16/158
if i'm looking at completely wrong gauges, please let me know. thanks.
#4
FB+FC=F-ME
Just get an autometer adjustable fuel level gauge.It can be set to whatever the sender puts out,on nearly any car.I had one on my V-6 GLC for a while and I recently reset it to work on my Samurai after pillaging the GLC for its engine.
The gauge is set when empty (or with 1-2 gallons if you want some reserve) then you fill the tank all the way and set it again.The gauge will remember the min and max Ohm readings programmed into it,then use them to indicate fuel level anywhere between the two.It works great!
The gauge is set when empty (or with 1-2 gallons if you want some reserve) then you fill the tank all the way and set it again.The gauge will remember the min and max Ohm readings programmed into it,then use them to indicate fuel level anywhere between the two.It works great!
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
imitek
3rd Generation Specific (1993-2002)
9
08-28-15 05:28 PM
rx8volks
Canadian Forum
0
08-13-15 04:55 AM