fmic on series 1/2/3
#1
Newbie
Thread Starter
Join Date: Jul 2006
Location: NZ
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
fmic on series 1/2/3
Hey guys, this my first post so hopefully not gona get shot down......
Wanting to know to has and what size, mods have been done to mount a fmic
i have a series2 that is currently under going a 13b transplant.
I know best location is under the radiator top cover with the sides either removed or a 3" hole cut for piping to come out.
pics would be great thanks
Wanting to know to has and what size, mods have been done to mount a fmic
i have a series2 that is currently under going a 13b transplant.
I know best location is under the radiator top cover with the sides either removed or a 3" hole cut for piping to come out.
pics would be great thanks
#2
FB+FC=F-ME
In front of the radiator is the compact and easy way to go.But you have to cut some stock sheetmetal to get in there.
I put mine all the way up front which added some length to the intake tract,but it did free up more space for my custom radiator and oil cooler tinwork.Mounting the IC all the way up front is easy if your running an aftermarket airdam.Just use a saw and cut 2 notches in the airdam,then insert the IC like a cassette.
Mine fits right between the bumper/frame horns,required no additional braces or mounts,and is completely un-theivable without taking the whole front of the car apart.......
I put mine all the way up front which added some length to the intake tract,but it did free up more space for my custom radiator and oil cooler tinwork.Mounting the IC all the way up front is easy if your running an aftermarket airdam.Just use a saw and cut 2 notches in the airdam,then insert the IC like a cassette.
Mine fits right between the bumper/frame horns,required no additional braces or mounts,and is completely un-theivable without taking the whole front of the car apart.......
#3
Newbie
Thread Starter
Join Date: Jul 2006
Location: NZ
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
looks good, i dont have aftermarket airdam like urs just factory, what size is that ic i did some measurements and ideally wanted 600-300-100 but 100mm in thickness seems to thick to fit in the available space