fixed starter problem!
11-03-01, 10:18 AM
#1
Junior Member
Thread Starter
Join Date: Oct 2001
Location: Northeast Pa.
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
fixed starter problem!
Following everyones good advice about replacing battery cables and cleaning contacts and such, I found the problem. An ignition wire(black/yellow)so badly corroded it broke in half! Looking at the starter through the engine compartment the wire looked fine.
I don't know why I didn't notice it before. I did a quick splice to see if it would work, and she started right up! Learned a valuable lesson to exhaust ALL possibilities before deciding on a course of action. Mainly shelling out money for another over priced part!
Thank you everyone for your help.
Vladu
I don't know why I didn't notice it before. I did a quick splice to see if it would work, and she started right up! Learned a valuable lesson to exhaust ALL possibilities before deciding on a course of action. Mainly shelling out money for another over priced part!
Thank you everyone for your help.
Vladu
Last edited by vladu666; 11-03-01 at 10:20 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Devon300zx
2nd Generation Specific (1986-1992)
15
09-16-15 06:57 AM