FINALLY got the n1 on :)
#1
The AUTO DOCTOR
Thread Starter
Join Date: Mar 2001
Location: South Side of ATL. Ga.
Posts: 1,952
Likes: 0
Received 0 Likes
on
0 Posts
FINALLY got the n1 on :)
well after a few weeks of BITCHING about a shop wanting 150$ to make a muffler pipe 2 feet long i did it myself...or with a friends help. anyway its 1/8 " piping and heavy as hell but good and thick. anyway... my 2 cents with the silancer tip thing in its about as loud as the stock setup i had... m.t. stage 5 header to bonez highflow then stock cat back. then when u yank out the silancer its a WHOLE NEW WORLD nice deep tone a little loud but not super loud... like the full stage 5 i had. ill post pics and video tomorrow if i get the time.
#3
I read your email
I'm not familiar with the N1..... got any links with info about it? Also, the Bonez bolted right up to your Mindtrain header? Are those headers still available and if so where?
#5
The AUTO DOCTOR
Thread Starter
Join Date: Mar 2001
Location: South Side of ATL. Ga.
Posts: 1,952
Likes: 0
Received 0 Likes
on
0 Posts
yea, mindtrain is still open, you can get it straight from them or from rotaryperformance.com. the stgage 5 is all cut like the stock size, but in 2.5 " so your stock cats will bolt right up or the bonez. and i had this header cat in both a 81 and 83. only thing id do to the header is get it coated... theres last for a while but 3 years now and im all metal. so i might get it (and the new n1 piping)ceramic coated....local place is CHEAP.
And b 4 the flames come its a non apex n1... im not droping 200$ on a muffler i might not like, buy i think i will now.... if it sounds like this 1
And b 4 the flames come its a non apex n1... im not droping 200$ on a muffler i might not like, buy i think i will now.... if it sounds like this 1
#6
Yeah, shutup kid.
I had some guy at midas put my N1 on for $50 used 2.25'' pipe and bent a new pipe exactly like the ond one on there, only .25'' wider. Mine's also not a true Apexi N1, but its still complete stainless, straight through, will last long as hell if not forever and total cost was only $140.
#7
Im trying to think about what exhaust im going to put on my 84. When you get the chance put up a pic. i don't know if to use greddy or do n1 or racing beat, but its for a turbo application and i think piping will be about 3" or close to it
Trending Topics
#10
Learn to swim.
Join Date: Jul 2001
Location: Mobile,AL
Posts: 1,301
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by BadAssRX-7
ok the camera is charging but heres some pics from the night we did the pipe and install, ill get video TODAY.
ok the camera is charging but heres some pics from the night we did the pipe and install, ill get video TODAY.
Mike
#11
The AUTO DOCTOR
Thread Starter
Join Date: Mar 2001
Location: South Side of ATL. Ga.
Posts: 1,952
Likes: 0
Received 0 Likes
on
0 Posts
kma mike :P they were to big and wouldnt load. here are videos this is just a bunch of misc pics and 2 viedos of the car running and reving
Last edited by BadAssRX-7; 08-04-02 at 07:27 PM.
#14
The AUTO DOCTOR
Thread Starter
Join Date: Mar 2001
Location: South Side of ATL. Ga.
Posts: 1,952
Likes: 0
Received 0 Likes
on
0 Posts
some times image station is a pain in the *** and wont load the files email me BADASSRx-7@excite.com and ill emal them 2 u
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM