mjm4jc

Hello everyone,

For those who are using a 2nd gen coil in their FB, you may be able to help me. I'm going to be using both the fc leading and trailing coils on my SE per my custom made harness that goes with my Haltech. The leading fc coil that I was using in the past for direct fire on my SE is a bit modified/cut. I want to put the leading coil back to stock. Is the black wire coming from the igniter and out the top for the tach? If so, this would connect to the YG wire for the trailing coil/igniter on the stock harness according to the 84 wiring diagram. Correct? I believe that this wire had a bullet connector on it before it was cut. The other two wires that come out of the top from the igniter (brown and black) go to the positive and negative terminals on coil accordingly (black on negative and tan on positive). Correct? Looks like they can only go that way in light of how the igniter and coil mount together, but I don't want to assume anything at this point.

Thanks!