1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

fb that won't start

Thread Tools
 
Search this Thread
 
Old May 9, 2004 | 06:19 PM
  #1  
FirstGenMonkey's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Apr 2004
Posts: 6
Likes: 0
From: Layton ut
fb that won't start

I have a 82 that I just can't get to start I tested the starter motor it was bad I am going to replace that this friday but the guy that tested it for me showed me what was wrong with it. Him and I both thought that the starter was not the problem cause it was working to an extent. I have check the spark it has that it is getting gas to the carb but I still don't know what it wrong with it.. I was hoping that someone on here might have some type of suggestion???
Reply
Old May 9, 2004 | 11:24 PM
  #2  
mazdaverx713b's Avatar
Have RX-7, will restore
Veteran: Army
Tenured Member: 20 Years
Loved
Community Favorite
iTrader: (91)
 
Joined: Oct 2003
Posts: 22,577
Likes: 1,273
From: Ohio
how is the timing and compression??? also, what is the condition of the plugs and the ignition sytem components? also, have you tried any starting fluid?
Reply
Old May 10, 2004 | 01:51 AM
  #3  
FirstGenMonkey's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Apr 2004
Posts: 6
Likes: 0
From: Layton ut
I do think that the timing is greatly off and need to get that done the compression I don't have the slitest idea the plugs and wires are brand new, and I did try the starting fluid before I let it sit throught the winter... thanxs for the help with this...
Reply
Old May 10, 2004 | 10:44 AM
  #4  
mazdaverx713b's Avatar
Have RX-7, will restore
Veteran: Army
Tenured Member: 20 Years
Loved
Community Favorite
iTrader: (91)
 
Joined: Oct 2003
Posts: 22,577
Likes: 1,273
From: Ohio
if the timing is off, the engine wil have a hard time starting but should start and will run rough, backfiring and missing like the devil. the starting fluid should have fired the engine up. is the gas good that sits in the tank? is the carb gummed up? check the sight glass on the front of the carb after you crank the engine. it should be half full of gas, nothing more. this is your float sight glass. if the level is off, you carb is out of adjustment and that will prevent the engine from starting.
Reply
Old May 10, 2004 | 01:20 PM
  #5  
FirstGenMonkey's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Apr 2004
Posts: 6
Likes: 0
From: Layton ut
ok I will check that thanxs
Reply
Old May 10, 2004 | 04:58 PM
  #6  
Full Member
Tenured Member 05 Years
 
Joined: Apr 2003
Posts: 61
Likes: 0
From: Demotte, IN
welcome to my world. mmo, clean plugs, new gas nothing helps.
Reply
Old May 10, 2004 | 05:01 PM
  #7  
apexme's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Apr 2004
Posts: 151
Likes: 0
From: Columbia SC
you do realize there is a very nice article on getting one of these to run in the sticky thread... lol
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
1993fd3sracer1
3rd Generation Specific (1993-2002)
29
Oct 13, 2015 01:57 PM
1993fd3sracer1
1st Generation Specific (1979-1985)
20
Sep 7, 2015 11:50 AM
Im faster
General Rotary Tech Support
4
Aug 19, 2015 02:57 PM




All times are GMT -5. The time now is 06:31 PM.