1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Fan sound

Thread Tools
 
Search this Thread
 
Old Apr 15, 2004 | 03:46 PM
  #1  
Xtreise's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: Jan 2004
Posts: 235
Likes: 0
From: gatineau, Quebec, canada
Fan sound

Hi guys, I removed the belt from the pulley that goes to the the air conditioner(trying to gain more HP if that's possible) ..I noticed now when I'm driving, the fan is not has loud as before. The fan really sounded more powerful before..jet like suction...??
The air conditioner pulley is not seized either.
Also that means that there is only one belt, for the alternator and waterpump...is this ok...does the fan operate separately...

Any idea.

Thanks
Reply
Old Apr 15, 2004 | 04:04 PM
  #2  
red13brx7's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Oct 2003
Posts: 519
Likes: 0
From: Pennsylvania
You can have the fan operate with only one belt, from the alternator, but they make a double pulley belt to compensate. Because some people get a whining belt. BUt the reason you fan doesn't sound as strong is because the AC belt was probably drawn fairly right, leaving a little tension off the belt will make the sound of the fan go down. If you want that jet sound, just go back out and tighten the fan belt. I would recommend getting a dual pulley alt belt from racing beat or mazdatrix.
Reply
Old Apr 15, 2004 | 06:09 PM
  #3  
Junior Member
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 49
Likes: 0
From: gatineau, Quebec, canada
Ok....many thanks...do I get more HP when I cancell the air conditioner belt ???
Reply
Old Apr 15, 2004 | 07:01 PM
  #4  
red13brx7's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Oct 2003
Posts: 519
Likes: 0
From: Pennsylvania
You free up some horsepower, because you don't have to drive another belt. But yea, it should be a little faster now.
Reply
Old Apr 15, 2004 | 10:22 PM
  #5  
Senior Member
Tenured Member 10 Years
 
Joined: Oct 2001
Posts: 332
Likes: 0
From: TN
I doubt you could even tell any horsepower difference, unless you compared having your A/C on to not having it on. The a/c compressor does not draw much hp untill it is turned on. When I took my air pump off I could not tell a difference and it always spins.
Reply
Old Apr 15, 2004 | 11:21 PM
  #6  
sweetege's Avatar
bzzzzzzzzzzzzz
Tenured Member 15 Years
 
Joined: Jan 2002
Posts: 418
Likes: 0
From: Cookeville, TN
Nick you be stupid, dude you still have your airpump hooked up and working your 5th&6th ports duuhhh... yes you can tell a difference i went from having everything to taking off the airpump,ACV, NO A/C belt and a highly free flowing airbox with all the junk removed and i couls tell a big difference. (stupid brother)
Reply
Old Apr 16, 2004 | 01:07 AM
  #7  
cpt_gloval's Avatar
KARATE EXPLOSION
Tenured Member 20 Years
iTrader: (1)
 
Joined: Aug 2001
Posts: 2,991
Likes: 34
From: Deadmonds, WA
my butt dyno notices a big difference with the belts disconnected.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rotor_veux
2nd Generation Specific (1986-1992)
7
Sep 19, 2015 07:13 PM
RyanFox
New Member RX-7 Technical
7
Sep 18, 2015 09:09 PM
83revival
New Member RX-7 Technical
4
Sep 3, 2015 10:42 PM




All times are GMT -5. The time now is 07:38 PM.