1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Factory wheels/tires

Thread Tools
 
Search this Thread
 
Old Apr 7, 2002 | 07:16 PM
  #1  
bylinepjw's Avatar
Thread Starter
Junior Member
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 29
Likes: 0
From: wausau, wi
Factory wheels/tires

I remember fitting 205/60/13 tires on my first Rex with factory wheels, but I'm not sure. Does anyone know, will these fit the factory, stock wheels?
Reply
Old Apr 7, 2002 | 07:42 PM
  #2  
82transam's Avatar
Never Follow
Tenured Member: 20 Years
iTrader: (18)
 
Joined: Feb 2002
Posts: 8,389
Likes: 120
From: North Jersey
Yep, Got 'em on my car.
Reply
Old Apr 7, 2002 | 07:43 PM
  #3  
riffraff's Avatar
smog nazi destroyer
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 1,681
Likes: 1
From: california
what are the stock tire size..
i need some new rubber (and cannot get new wheels yet) so i am probably going to go and get a cheep set for 100 all the way around..

i will probably go with 205's now that i know they will fit
Reply
Old Apr 7, 2002 | 08:17 PM
  #4  
V8kilr's Avatar
Rotary Freak
Tenured Member 10 Years
 
Joined: Apr 2001
Posts: 2,441
Likes: 5
From: Troy,Mi
205/60 will fit,
also if you wanna go cheap get the sumitomo from tirerack.com

there the cheapest and one of the best looking and have great road holding ability in warm weather

the 215/50 will also fit if you want to go extreme
sumitomo also makes a tire in that size

the stock size is 185/70

the sumitomo's are the htr 200 series
i have them on my car now the 205/60
Reply
Old Apr 7, 2002 | 08:23 PM
  #5  
V8kilr's Avatar
Rotary Freak
Tenured Member 10 Years
 
Joined: Apr 2001
Posts: 2,441
Likes: 5
From: Troy,Mi
additional points are that the sumitomo's are "H" speed rated "130mph"

while replacment tires are only "S" speed rated "112mph"

and cheapo replacment or stock tires are "R" speed rated "106mph"
Reply
Old Apr 7, 2002 | 09:36 PM
  #6  
riffraff's Avatar
smog nazi destroyer
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 1,681
Likes: 1
From: california
if do get the 205/60's
i would imagine that i would need to adjust my speedo
correct?

i did not think that 215's would fit on a 13in rim
Reply
Old Apr 7, 2002 | 10:50 PM
  #7  
adssoccer's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Feb 2002
Posts: 247
Likes: 0
From: Omaha, NE
13in diameter isn't the problem, its that little 5.5in width
Reply
Old Apr 7, 2002 | 11:30 PM
  #8  
V8kilr's Avatar
Rotary Freak
Tenured Member 10 Years
 
Joined: Apr 2001
Posts: 2,441
Likes: 5
From: Troy,Mi
Originally posted by riffraff
if do get the 205/60's
i would imagine that i would need to adjust my speedo
correct?

i did not think that 215's would fit on a 13in rim
your speedo barley even gets thrown off.

i found a calculator on line that would tell you the diference,
it had soemthing to do with corvettes,
the smallest rim size to choose was a 14" but the diference is the same from a 185/75 to a 205/60

its only off by like 1 or 2 mph at 40

just remember your going slower then your speedo says,
good way to not get a ticket for speeding
Reply
Old Apr 7, 2002 | 11:33 PM
  #9  
riffraff's Avatar
smog nazi destroyer
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 1,681
Likes: 1
From: california
true true.. setting my speedo fast like that would help...
hey, i might do that anyways.
Reply
Old Apr 7, 2002 | 11:36 PM
  #10  
V8kilr's Avatar
Rotary Freak
Tenured Member 10 Years
 
Joined: Apr 2001
Posts: 2,441
Likes: 5
From: Troy,Mi
Originally posted by riffraff
true true.. setting my speedo fast like that would help...
hey, i might do that anyways.
just buy the tires,then its doen for you.
and you get the advantages of
a better tire,
a better tire size
a higher speed rated tire
a much,much better apearance
Reply
Old Apr 7, 2002 | 11:40 PM
  #11  
riffraff's Avatar
smog nazi destroyer
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 1,681
Likes: 1
From: california
yup yup.. i am going to do that soon.. i cannot afford to get new wheels now (since i want to do suspension first) but i definatly need new rubber.. if 205/60's fit on the stock rims, then that is what i will get... damn knows i need something other than those dry rotted bicycle tires that are on there right now...
Reply
Old Apr 7, 2002 | 11:43 PM
  #12  
Rotor13B's Avatar
Wassup!!
Tenured Member 15 Years
 
Joined: Jul 2001
Posts: 1,081
Likes: 1
From: Longmont Co.
I have the 205/50/13's on my car, (sumitomo) and they handle great, it's the take off when they suck. I can take them through 3rd and spin them like no other if i get on it and let it go!!!!!
Reply
Old Apr 7, 2002 | 11:45 PM
  #13  
riffraff's Avatar
smog nazi destroyer
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 1,681
Likes: 1
From: california
i would not expect them to be all that good.. it is only going to be a temporary thing for me.. until i can get a set of either 15 or 17 in wheels.. then the real fun begins.. hands up for traction..
Reply
Old Apr 8, 2002 | 12:16 AM
  #15  
riffraff's Avatar
smog nazi destroyer
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 1,681
Likes: 1
From: california
brake : where do you see a difference now that you have 195's in the front? i thought that 205's would work just fine.
Reply
Old Apr 8, 2002 | 12:58 AM
  #16  
V8kilr's Avatar
Rotary Freak
Tenured Member 10 Years
 
Joined: Apr 2001
Posts: 2,441
Likes: 5
From: Troy,Mi
Originally posted by brake

i disagree. the 205 is quite close to the strut. i think the 215 would rub.
i wouldn't try a 215/50 on a 5.5" rim, too wide. i think my current 195/60 front and 205/60 rear handles better then when i had 205's all around.
i seen a pic with it done and asked what size and brand they were,
sure enough sumitomo 215/50 on the stock 13" rim,

dont know if he had any rubbing problem though
Reply
Old Apr 8, 2002 | 01:29 AM
  #17  
riffraff's Avatar
smog nazi destroyer
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 1,681
Likes: 1
From: california
i think that i would stick with no larger than 205's on a 13x5.5 rim... i do believe you that they will fit, just donot think that i would want to push it that much... on 15's or 17's sure, but something about having that much rubber on a 13 just does not seem right
Reply
Old Apr 8, 2002 | 01:31 AM
  #18  
V8kilr's Avatar
Rotary Freak
Tenured Member 10 Years
 
Joined: Apr 2001
Posts: 2,441
Likes: 5
From: Troy,Mi
Originally posted by riffraff
i think that i would stick with no larger than 205's on a 13x5.5 rim... i do believe you that they will fit, just donot think that i would want to push it that much... on 15's or 17's sure, but something about having that much rubber on a 13 just does not seem right
they wouldnt handle that well either,
thats why i said "extreme"
Reply
Old Apr 8, 2002 | 01:32 AM
  #19  
riffraff's Avatar
smog nazi destroyer
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 1,681
Likes: 1
From: california
ahh.. looked back through the thread.. i guess i just missed that key word..
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Single Turbo RX-7's
1
Sep 30, 2015 05:58 PM




All times are GMT -5. The time now is 03:22 AM.