exhaust ?
#1
Senior Member
Thread Starter
Join Date: Apr 2007
Location: ottawa ks
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
exhaust ?
im putting 2 1/2 stainles straight pipe with mangnaflow muffler what do i do with the o2 sensors get ride of them or can i get some different ones or use stock ones ive done some looking all i find is stock ones
Trending Topics
#11
GOT WANKEL?
sound. i had the same 2.5" setup with one 6" round magnaflow and i got another muffler the next day! It made it hard to hear yourself think above 3k. Look into a borla presilencer.
#13
Senior Member
Thread Starter
Join Date: Apr 2007
Location: ottawa ks
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
does it sound ricy or muscly (if those are words) \
im still having a hard time to get someone to do it either they dont have equipment or the wont eleminate the cats cause it is illegal the say( only if caught)
im still having a hard time to get someone to do it either they dont have equipment or the wont eleminate the cats cause it is illegal the say( only if caught)
#14
GOT WANKEL?
it sounds rotary. Not too much like it. There is a RX-3 with a 13BT downpipe only here at the drag strip and it sounds nothing like any other (piston) car. Borla seems to be the best sounding, yet *some* have tried flowmaster with mixed opinions, most of them don't like. There was someone recently who had a flowmaster in and liked it, maybe you could ask for a sound clip?
You have to have a cat in ks? In mo, it's no problem and i'm emissions exempt
You have to have a cat in ks? In mo, it's no problem and i'm emissions exempt
#15
Senior Member
Thread Starter
Join Date: Apr 2007
Location: ottawa ks
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
well they inspection guy didn't even check anything on the car but the vin. but i think i found someone
if al else fails i some duck tape pipe claps and bubble gum and fix her right up
if al else fails i some duck tape pipe claps and bubble gum and fix her right up
#17
Junior Member
Join Date: Jun 2007
Location: Rotonda West, FL
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Let me start this by saying that I know practically nothing about exhaust. I didn't see any exhaust specific section in the FAQ, if there is a good page for information on exhaust please direct me towards it.
Does anyone else have any experience with exhaust? What brand mufflers are quieter? Do presilencers restrict air flow? I looked and Borla doesn't have exhaust specifically for a 1985 RX-7 GSL and directed me to their "Universal" section. Can I buy the manifold, presilencer, pipes, and muffler all in one big package? Is Monza any good?
Does anyone else have any experience with exhaust? What brand mufflers are quieter? Do presilencers restrict air flow? I looked and Borla doesn't have exhaust specifically for a 1985 RX-7 GSL and directed me to their "Universal" section. Can I buy the manifold, presilencer, pipes, and muffler all in one big package? Is Monza any good?
#19
Junior Member
Join Date: Jun 2007
Location: Rotonda West, FL
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
What is that? Catback exhaust, muffler? or can you also get manifolds from Magnaflow? How much of a difference would there be in using a catback or putting headers on there and eliminating the catalytic converter all together? I live in Florida, there are no emissions tests, I have no idea if eliminating the cat is illegal or not here.
Can I install headers, a high-flow cat, and different muffler? Or is it best to just eliminate the cat all togheter if I install headers?
Once again, I really have no idea when it comes to exhaust, or too much about cars in general, I'm a PC guy.
Can I install headers, a high-flow cat, and different muffler? Or is it best to just eliminate the cat all togheter if I install headers?
Once again, I really have no idea when it comes to exhaust, or too much about cars in general, I'm a PC guy.
Thread
Thread Starter
Forum
Replies
Last Post