I need a 18" Wide X 12" Tall E-fan for my radiator. What's the best brand to get? I want the most CFM's I can get.. Any Ideas?

 

Auto zone. victora british.

they all do the same thing.

 

I would like one that pulls at least 2k CFM. Will check Autozone tommorow

 

Autozone and BD sell Imperial fans, most of them don't pull the cfm. If you want a new one, check, Summit, Jegs, etc.

 

If I were you, I would get a ford taurus fan since there is plenty of space betwee the engine and rad.

I dotn think autozone would have anything above 2K CFM.

 

Ive heard alot about putting ford taurus fans.

Well, you could always buy one from jegs.com good ones.

 

what about the black dragon electric fan? thoughts on that?

 

black magic is good but very $$$.

Now for junkyard fan, I use fiero fan due to lack of space as Im running a 13-B block and I did not modify the radiator frame/mounts. The Fiero fan is ok but not as strong as a taurus. No one can beat a $25 junkyard price and there is plenty supply of Found On Road Dead taurus.

 

Yes, if you read my earlier post, it is and Imperial fan, the big one puts out 1200 cfm, iirc, and it was not big enough to cool my 2nd gen NA at 90* temps, driving in the city. It has a new home on the shelf. Thier fan is 50 bucks more than the same ones found at Advance Auto.

 

Taurus e-fan?

 

My setup:

On Radiator:
14" Mr Gasket Reversible fan 1800CFM

In V-mount opening
16" Black magic Reversible fan can't remember CFM(prob about 3000)

Total CFM = 4800

 

Got a pic of the fans installed?

 

I'm thinking of adding a 14" pusher fan in front of the intercooler.. What do you guys think?

 

No I don't sorry. Space is so cramped in there it is hard to get a good shot.

 

I am also in the process of looking for a fan the same size you specified. The best bet would be to go w/ a dual set-up, kinda of like this dual 10in fan from summit.
http://store.summitracing.com/partde...5&autoview=sku

Ryan

 

Thinking about putting this for a pusher in front of intercooler..

http://store.summitracing.com/partde...5&autoview=sku

 

lol, same thing I recommended . Do you think 1800 cfm would push/pull enough air for our cars?? What does the stock fan pull I wonder??

 

I will keep my puller fan i have now and just add this to come on around 205 deg with the haltech..

 

Found On Road Dead taurus.



Ahaahaha, dude.

but your aware ford owns part of mazda?

 

What about putting a puller fan on one side of the rad and a pusher on the other side of the same rad? Like sandwiching the radiator between two fans, would this work, or just a stupid idea by me?>
Ryan

 

I was thinking the same thing..

 

May not be stupid but it would be ugly, and first time some one shot up any gravel you might loose fan #1. I have been driving around without a fan for a week now, as long as when its the middle of the day or your not in stop and go traffic I never have a problem with the heat going up. And if it does I just turn on the heater full blast and point it out the passenger window. I am investing in a 10 inch sigle fan that I am going to fab up to the stock shroud. I think.

 

No offense, but some of the taurus fan set-ups look like hack jobs. i would just buy a nice aftermarket 14in fan and ditch the OE shroud.

 

Are you running a bit warm with only one fan?

 

they sure do but hay it gets the job done for cheap and a bit of thinking