Dynomax, Flowmaster, Magnaflow, or should i get a import muffler tip?
#1
Full Member
Thread Starter
Join Date: Apr 2006
Location: Texas
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Dynomax, Flowmaster, Magnaflow, or should i get a import muffler tip?
Im going to put a pacesetter headers, but i dont know what type of muffler i should get...any idea's?
#2
Right near Malloy
iTrader: (28)
Join Date: Dec 1999
Location: Behind a workbench, repairing FC Electronics.
Posts: 7,840
Received 505 Likes
on
342 Posts
Pacesetter headers? Why? You get the same horsepower increase by adding water to your fuel.
There's only one brand you need to know about here...
Well two actaully.
Mindtrain which is very rare to see, but is good if you have emissions because a cat can bolt up to their header.
And the almighty Racing Beat.
Mucho pricy, but well worth.
Pacesetter is utter crap. Some of the guys here have said the welds are trash and the bolt holes don't line up properly.
There's only one brand you need to know about here...
Well two actaully.
Mindtrain which is very rare to see, but is good if you have emissions because a cat can bolt up to their header.
And the almighty Racing Beat.
Mucho pricy, but well worth.
Pacesetter is utter crap. Some of the guys here have said the welds are trash and the bolt holes don't line up properly.
#3
Moderator
iTrader: (3)
first of all, welcome.
second of all, are you asking about mufflers or just tips???
thirdly, listen to Pele ... melt that Pacesetter-atrocity down and forge a model of your car out of it ... it'll help you more then.
fourth, if you were asking about mufflers, then the only choice you mentioned that makes me cringe is the FlowMaster. i had a Walker/Dynomax (aluminized, 2.5") on one of my past Rx-7s and it survived about 5 years of hard use - meaning it didn't melt, get blown apart or fail. it was still working when i scrapped the car. Magnaflow, i've never used for myself, but one of my favorite cars on this board (Kramer - you can search) uses 1 or 2 of them, i can't remember.
second of all, are you asking about mufflers or just tips???
thirdly, listen to Pele ... melt that Pacesetter-atrocity down and forge a model of your car out of it ... it'll help you more then.
fourth, if you were asking about mufflers, then the only choice you mentioned that makes me cringe is the FlowMaster. i had a Walker/Dynomax (aluminized, 2.5") on one of my past Rx-7s and it survived about 5 years of hard use - meaning it didn't melt, get blown apart or fail. it was still working when i scrapped the car. Magnaflow, i've never used for myself, but one of my favorite cars on this board (Kramer - you can search) uses 1 or 2 of them, i can't remember.
#4
MattG FTW!!!!!
iTrader: (2)
Join Date: Feb 2005
Location: South Windsor, CT
Posts: 2,733
Likes: 0
Received 0 Likes
on
0 Posts
Ok first off, cut out the pacesetter, only pace you will be setting is last!
Get the Racingbeat one you will be glad you did!
Second, in my opinion Dynomax and Flowmaster, are better suited for trucks and such.
Go with the Magnaflow, and for gosh sakes dont get a cheap wannabe ricer tip!
Here is your best bet, A magnaflow #14815 with a dual tip outlet with a 2.5 inch inlet!
Get the Racingbeat one you will be glad you did!
Second, in my opinion Dynomax and Flowmaster, are better suited for trucks and such.
Go with the Magnaflow, and for gosh sakes dont get a cheap wannabe ricer tip!
Here is your best bet, A magnaflow #14815 with a dual tip outlet with a 2.5 inch inlet!
#5
Rotary Enthusiast
iTrader: (14)
Join Date: May 2004
Location: Drifting a Roundabout near you!
Posts: 1,366
Likes: 0
Received 10 Likes
on
10 Posts
This is what I put on mine and I love it. No presilencer, just hollowed out cats to the magnaflow(model 12615).
I put the tip and the front flange on and welded the hanger from my old muffler to the new one once it was positioned and then painted the body/welds with 1400 degree paint. They have alot of other types you can use too. Even the dual tip.
www.magnaflow.com
I put the tip and the front flange on and welded the hanger from my old muffler to the new one once it was positioned and then painted the body/welds with 1400 degree paint. They have alot of other types you can use too. Even the dual tip.
www.magnaflow.com
Trending Topics
#8
The Shadetree Project
iTrader: (40)
magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow it really doesn't matter which you get it's all about magnaflow. I'm running 3" turbo back with a dynomax bullet presilencer and a magneflow muffler. It's the best sounding rotary I've ever heard. Period!!!The Racing beat is a waste of money get the magnaflow aluminized!!! It's cheap and does an amazing job!
www.magnaflow.com
www.magnaflow.com
#10
Full Member
Thread Starter
Join Date: Apr 2006
Location: Texas
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
ok so this import tip is out of the question...i was looking up magnaflow and its quiet and loud at the sametime...im going with a magnaflow....thanks comrades!!!
Thread
Thread Starter
Forum
Replies
Last Post