I wanted to know if anyone knew how to set up the throttle linkage on a 12a rotary. I have the dual dellorto 40mm carb setup, yet none of the linkage came with the kit. I have not been able to find anyparts for this, so any ideas, or positive thoughts are welcome.

Thanks

 

I go to these guys all the time. Good people.

European Motorworks
13224 Prairie Avenue
Hawthorne, California, U.S.A. 90250

Telephone (310) 644-8038
(800) 722-8768 in U.S.
Fax (310) 644-8042

Hours:
8 am - 5 pm PST, Monday through Friday
9 am - 2 pm PST, Saturday

email us: sales@europeanmotorworks.com

 

got an erector set?j/k lol

 

Where did you get a manifold for this dual carb set up? I have been looking at webers and dells, and the dual 40's seem ALOT cheaper than a single 48. How much did you pay for them?

 

I bought the Dual Dellorto 40mms from a guy in Italy, selling them off ebay.

The carbs costed me $160.00 shipped. If you want the guys name i can give it too you. He was really good at shipping.

The Manifold, I bought from a guy named BadAssRx7 off this forum for $150.00.

And then I bought some Velocity stacks for $50.00.

The setup is on the car and it is running, but I haven't been able to figure out a setup for the throttle linkage setup. The carbs did not come with this. So any suggestions are great.

Thanks
Ben

 

hey you put it on.. damn i wanted to help out and see it happen, but i see how it is...

 

Come over today, Ryan is coming over to help me on it again. Give me a call at 425-643-1091 anytime today and ill give you directions... Come all.... I would love to have you over and compare engines.

Ben

 

There on but far from running....

 

so.... jealous... of.... dual..... dellortos!!!

drool.
picz of engine bay plz.

 

This is the standard linkage for twin webers ... it is made by weber but I'm sure i've seen a very similar set up for the Del's too

 

I wouldnt mind coming over, but it depends on when you plan on doing anything, and when I still have gas .

Im getting some jets today at about 5, so after that I could come down and check out what you have going on, maybe .

I guess Ill just call you or something .

~T.J.

 

I just bought a dellorto linkage for a straight manifold single dellorto setup from eurocarb, ltd. Their website is:

http://www.racecar.co.uk/dellorto/.

They are a UK company, but they seem to have just about anythng you could need for Dellortos. Good luck.

Conway

 

i bought a 40 drla down draft dellorto awhile back from a friend cause i thought it looked neat. i figured it was too small for a 12a but does anybody know if it might work?

(and it was only 7 bucks for a neat looking thing to set around)

 

hey i've been partying all weekend what are you doing tomarrow shizzit i'll give you a holla..