Door hinges
08-25-11, 02:03 PM
#1
Junior Member
Thread Starter
Join Date: Jul 2009
Location: WI
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Door hinges
I have an '84 GSL-SE. The driver's door is getting a little hard to close and I noticed
there's a little bit of up and down play in the door. I suspect my hinge pins are getting
worn. Can the hinge pins be replaced or do I have to replace the whole hinge?
Where can I get replacement hinges or hinge pins?
Thanks.
Mark
'84 RX-7 GSL-SE
there's a little bit of up and down play in the door. I suspect my hinge pins are getting
worn. Can the hinge pins be replaced or do I have to replace the whole hinge?
Where can I get replacement hinges or hinge pins?
Thanks.
Mark
'84 RX-7 GSL-SE
08-25-11, 02:44 PM
#2
what do you mean getting hard to close?? like does the door sag or is it just a pain to push on it. I bought a can of white lithium grease and sprayed it on the roller and it closes like a dream now.
08-25-11, 03:24 PM
#3
Junior Member
Thread Starter
Join Date: Jul 2009
Location: WI
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
The door is sagging. With the driver's door open I can lift on the outside edge and
there is a little movement. If I lift on the passenger door there is no movement.
Mark
'84 RX-7 GSL-SE
there is a little movement. If I lift on the passenger door there is no movement.
Mark
'84 RX-7 GSL-SE
Thread
Thread Starter
Forum
Replies
Last Post
