1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Do I have my wiring correct?

Thread Tools
 
Search this Thread
 
Old Jan 29, 2006 | 04:54 PM
  #1  
JLIU's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Nov 2002
Posts: 186
Likes: 0
From: CA
Do I have my wiring correct?

I am in the process of putting a 91' 80amp alternator to replace my 60A one in my SE.

I think I got all the wirings figured out. W/B wire connects to the "L" terminal(right side of the male connector in the alternator) which goes to the Dash. The "S" terminal (left side of the male connector in the alternator) goes directly to the (+) terminal of the battery. The "b" terminal goes to the fusilable link, which goes to the (+) terminal of the battery.

I will report back on the results once I get the alternator tomorrow. I have made all the wirings ready.

Jeff
Reply
Old Jan 29, 2006 | 05:02 PM
  #2  
vipernicus42's Avatar
Rotoholic Moderookie
Tenured Member: 20 Years
iTrader: (4)
 
Joined: May 2002
Posts: 5,972
Likes: 37
From: Ottawa, Soviet Canuckistan
https://www.rx7club.com/showthread.p...ght=alternator

In the archive. Sounds like you got it right if you ran a new wire to the battery for the "S" terminal, used one of the two existing connector's wires for the "L" terminal, and used the stock "B" terminal.

That's how I've got my FD alt wired in my '84 GS

Jon
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
rotor_veux
2nd Generation Specific (1986-1992)
5
Sep 3, 2015 07:10 PM




All times are GMT -5. The time now is 08:46 PM.