Anyone stumbled upon an easy solution here? I'm looking forward to getting some bracketry/other layout figured out, and if there was a easy off the shelf pulley setup/solution I could start with, I know how far out I need the blower to be.

Thinking I want about a 3.63" diameter crank pulley, but not set on that yet. It seems awfully small, but on paper would drive it about as fast as I think I want to drive it. This figuring 12krpm blower redline at 9krpm engine redline, stock ford blower pulley size of 3.15" diameter. Haven't verified the 3.15" figure and I know many drive them past 12K, but this is just a starting point.

Unless I won the lotto and could buy one of embree machine's reman (heck, re-engineered) eatons that support crazy RPM and ~500hp.

I know I should probably hit up Sterling and Peejay directly as I bet both of you have input here!

JR still hasn't sent me pics of what he had done up when his was "on" his car.

Thanks in advance!

R

 

hey crack smoker
wacth your mouth. if you want to find a pulley that size and promade. go hit the super coupe forum. there is a guy on there that sells them. but his are 3.65 but they should work do the math and sun it to just a hair over seven. What are you gonna run this one? The smoke machine? By the way i ahd fun at the auto cross you should have come out. I had pics of my eaton there but you were not there. i should get them transferred over this week but i ahve to get time i spent the weekend purring new bushings in my car to find an se suspension today at the meet. well if you need any other info drop me an email i ahev the link at work for the guyys page he has a bunch of toys for those eatons.

jr

 

Does that super coupe pulley go right on a 12A or 13B eccentric shaft?

Watch MY mouth? HAHAHAHAHA

 

I'm out of touch with your project - what sort of setup are you creating?

 

oops i was not reading. did nto see crank pulley. I went to a mchine shop and had them make mine it was not that bad. WEll this week has been shity any way. so figures i would screw up correcting you. sunspec in osage beach made mine. if you needs some help let me know. for once i might be able to help you.

jr