couple of questions about rats nest , 12a
#1
2stroke1971 (Neil)
Thread Starter
Join Date: Oct 2012
Location: east coast
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
couple of questions about rats nest , 12a
When removing the rats nest I broke the wire to what looks like a condensor, mounted on the rotor housing....what is that?
Also the breather (?) on the oil neck, I just ran that straight to the carb where it went eventually....
As for the stand pipe coming up from the housings...I guess that is the crank case breather...thought about putting a small filter on the end of that....?? I could run it to air filter as well I suppose....
I have not gotten into much on the passenger side....just removed the bank of valves and all those lines on the drivers side.
Ive already seen improvements in the way it runs.
Also the breather (?) on the oil neck, I just ran that straight to the carb where it went eventually....
As for the stand pipe coming up from the housings...I guess that is the crank case breather...thought about putting a small filter on the end of that....?? I could run it to air filter as well I suppose....
I have not gotten into much on the passenger side....just removed the bank of valves and all those lines on the drivers side.
Ive already seen improvements in the way it runs.
Thread
Thread Starter
Forum
Replies
Last Post
ray green
1st Gen General Discussion
2
09-02-15 06:35 AM