correct 1coil setup msd 6a installation
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: Dec 2006
Location: flatrock Alabama
Posts: 386
Likes: 0
Received 0 Likes
on
0 Posts
correct 1coil setup msd 6a installation
looking for the correct way to install a msd 6a box to one leading coil. ive tryed the faq's any diagrams etc will be helpful.
thanks
thanks
#2
djessence
http://www.mazspeed.com/msd.htm
hmm, that may not help as I just realized its one of the links in the FAQ's.
hmm, that may not help as I just realized its one of the links in the FAQ's.
Last edited by djessence; 04-27-08 at 10:58 PM.
#3
Rotary Enthusiast
iTrader: (12)
Join Date: Oct 2007
Location: Fort St John B.C. Canada
Posts: 871
Likes: 0
Received 0 Likes
on
0 Posts
depends how you want to hook it up,
i had mine hooked up throught the leading coil + and - wires frome the terminals
I unhooked the coil wires and connected the small white wire and i think a small red wire to the coil wires (red + white -) then hooked the large red and black wires to the battery and hookd the small orange wire to + on the coil and small black to the -
or
not using the white whire you can hook the small red wire to the + wire from the leading coil and tape up the - wire, take your leading igniter off the front of you distributor file down two male spade connestors until they fir in the magnetic pick up. take off you dist cap and note the wires going to the mag pickup ggreen wire in the dist goes to purple on the mag pickup on the MSD and the red wire in the dist goes to the green on th MSD, hook up to your battry and play
i had mine hooked up throught the leading coil + and - wires frome the terminals
I unhooked the coil wires and connected the small white wire and i think a small red wire to the coil wires (red + white -) then hooked the large red and black wires to the battery and hookd the small orange wire to + on the coil and small black to the -
or
not using the white whire you can hook the small red wire to the + wire from the leading coil and tape up the - wire, take your leading igniter off the front of you distributor file down two male spade connestors until they fir in the magnetic pick up. take off you dist cap and note the wires going to the mag pickup ggreen wire in the dist goes to purple on the mag pickup on the MSD and the red wire in the dist goes to the green on th MSD, hook up to your battry and play
Thread
Thread Starter
Forum
Replies
Last Post
diabolical1
2nd Generation Specific (1986-1992)
30
01-30-16 05:50 AM