1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Compression test???

Thread Tools
 
Search this Thread
 
Old Oct 16, 2001 | 08:16 AM
  #1  
treceb's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 15 Years
 
Joined: Jul 2001
Posts: 1,320
Likes: 1
From: Santurce
Compression test???

Since my car wasnt working, and didnt know why. I sort of checked my compression yesterday. I figured it couldnt do anymore harm.
Unplugged all of the spark plug wires, then removed the leading plug on one rotor and cranked it. pshh, pshh, pshh... Replaced the plug and removed the leading on the second rotor. pshh, pshh, pshh.
Now, was this sort of what i have to do. They all sounded the same and pretty even. If i dont have any real problems with the car, ie, sluggish at take off or when trying to pass. Should I assume that its fine. I mean, if they all sounded the same, but the compression was bad, would it run at all.
Thanks
Reply
Old Oct 16, 2001 | 08:37 AM
  #2  
jimmyv13's Avatar
Round&Round not Up&Down
Tenured Member 15 Years
 
Joined: Aug 2001
Posts: 2,805
Likes: 0
From: West Bloomfield, MI
Mt car ran with a blown seal, not very well mind you, but it ran. It started and idled, but no pick-up. I had to drive it to the shop which was about 20 miles away..... it took me forever to get up to speed and I used about a 1/4 tank of fuel.

The motor sounds good.
Check fuel, air and spark.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
BLK 93
3rd Generation Specific (1993-2002)
11
Sep 9, 2015 10:56 AM
SCinfidel
3rd Generation Specific (1993-2002)
4
Sep 8, 2015 05:36 PM
ZaqAtaq
New Member RX-7 Technical
2
Sep 5, 2015 08:57 PM




All times are GMT -5. The time now is 04:52 PM.