Compression Question
#1
Too Many Projects!
Thread Starter
Join Date: Jul 2005
Location: Ontario, Canada
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Compression Question
I know there are probably plenty of threads that deal with compression issues, but I am looking for some quick, general opinons from the pros...I'm looking at picking up a fairly decent '85 GS as a parts car...the owner says the car is complete and the engine will turn over, and spit and sputter but will not run. He has done a compression test and there is ZERO compression. My question is, what are the possible causes of zero compression, does it mean a complete engine rebuild, or what are the chances of getting this particular engine running again? All replies appreciated. Thanks!
#2
Lives on the Forum
Well, its a long shot but you might try this; pick up a can of SeaFoam and dump it down the carb while rotating the engine. Then just let it sit in there for a couple of days before you recheck the compression. If the apex seals are just clogged up with carbon, then this might break them free.
Thread
Thread Starter
Forum
Replies
Last Post
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM