Matty's first 1st Gen

Sorry guys, i tried to search, but i couldn't come up with anything, I disconnected my coldstart assist a long while ago, and not i'm hooking it back up because i want to have MMO injection(as mentioned in other posts). I'm assuming that the tube would go to one of the nipples of the intake manifold, which one should i hook it up to, or does it not really matter as long as there is vaccume. also i don't see any harm in mmo being injected every now an then for laughs or looks, I figure it burns pretty well, and cleans, and i no longer have cats, so i see this causing no harm. Thanks In advance.

-Matty

mar3

iTrader: (8)

It goes to the carb near the base...on an SE, if it even has this, I wouldn't have a clue as to where it went...

Rx7carl

The cold start assist nozzle connection is between the 2 small omp connections. Theres a big nipple between them that has passages that flow to 2 ports on the accel pump nozzle housing (not the same 2 that the gas squirts out of).

Gregs

Cold start goes OUT of your car and INTO the trash

slashdawg00110

Not the trash, but the parts pile instead. Then you have a chance to sell/give it someone who really, really wants one. Like to make a rolling fog machine. Seriously, does the motor in your C/S system even work? I've had two Rx-7s, both 83s, and the motor never worked in either, hence the desire to rip out the whole assembly and cap the nipple. Right now, I'm lazy and just capped the nipple.

And the hot start assist motor and cables should go right along with the cold start crap. All the hot start does is crack the throttle plate open a bit and yer foot can do the same thing.