Apparently 28 year old clutch master cylinders dont like clutch kicks.

I was just wondering if i could replace my stock(blown) unit with one from an FC? Use the push rod from the FB and everything else from the FC? Would that work?

 

the studs for mounting the fb master is at 12 and 6 positions. i think i've read somewhere before that the fc master is different.

 

you are correct... i guess i could drill some holes lol

 

why? just get an FB one, they are CHEAP from places like NAPA

 

70 bucks is not cheap. 16 is. Rock auto ftw

 

while we are on this topic, what is the bore for an FB Clutch MC? 5/8ths?

 

 

thats brake MC.. lol

 

Try again.

 

rock auto ftw, I had to replace mine, good quality too.

 

i didnt end up buying anything to fix it. I took a fc master, took out the internals, modified the piston, and used the FB spring. works wonders.

 

today. it will live a short life...

 

Still working. Just blew up the slave now.. lol

 

they tend to do that. that's why many of us suggest when one goes, go ahead and replace both along with the flex hose.

 

good thing i have another slave and another flex hose