Clicking in rear end
#1
Rotary Enthusiast
Thread Starter
Clicking in rear end
When I make a sharp right hander I hear a clicking sound. pretty hard like gears binding or something. Anyone ever have this.
I'm thinking of a few culprits......maybe the swaybar or metal holders over the rubbers is hitting the frame. Pretty sure I have the wrong spacer in there as the sway bar is close to the frame and the linkage is right there where it could easily rub.
Maybe the ebrakeis engaging a little. This is a v8 conversion and the ebrake cables run right under the rear linkage.......something I need to reroute and come up with a new solution.
It doesn't do it when not under power. just slow tight turns. has 16/245 on the back which I am sure cause more bindage than stock
I'm thinking of a few culprits......maybe the swaybar or metal holders over the rubbers is hitting the frame. Pretty sure I have the wrong spacer in there as the sway bar is close to the frame and the linkage is right there where it could easily rub.
Maybe the ebrakeis engaging a little. This is a v8 conversion and the ebrake cables run right under the rear linkage.......something I need to reroute and come up with a new solution.
It doesn't do it when not under power. just slow tight turns. has 16/245 on the back which I am sure cause more bindage than stock
Thread
Thread Starter
Forum
Replies
Last Post
DREYKO
2nd Generation Specific (1986-1992)
2
07-30-06 06:47 PM
slow_2ed_gen
2nd Generation Specific (1986-1992)
1
03-05-06 05:14 PM