i have a 1982 rx7 when i turn the ignition on it just overflows into the carb the return line is working i though maybe it was the floater but id rather not tear into it if it's not... lemme know im gonna work on it today

 

It's either a bad float or a worn out needle and seat. You should rebuild or replace that carb with a rebuilt one.

Vernon

 

probably a rebuild but are you running an aftermarket fuel pump? a fpr?

 

as far as i know it's the same fuel pump but im gonna try to see if if i can fix the float ill repost today if i do...

 

omfg i took the carb aprt and it was brown and gritty as hell iv'e never seen nething this bad before it wil need to be rebuilt very very badly