1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Carb issue and no access to manual

Thread Tools
 
Search this Thread
 
Old 01-04-22, 04:47 PM
  #1  
Rotary Enthusiast

Thread Starter
 
Ckforker's Avatar
 
Join Date: Mar 2014
Location: Cape Charles, VA
Posts: 774
Received 109 Likes on 89 Posts
Carb issue and no access to manual

When I tried to look at the online manual, the fuel section is unavailable.

My stock 85 12a stalls every time I let off the throttle when it's cold outside, but the engine is warm enough to kick off the choke.

If I let off the throttle to stop, it idles down to zero and shuts off. It restarts with a little coaching and stays running as long as throttle is applied, or you feather the throttle down at stops. This only happens when it's cold outside, it doesn't matter how long I've run the engine. The temp gauge works and the thermostat housing is at operating temp.

What controls the idle stability when throttle is suddenly released? My Haynes manual is zero help.

If it's warm outside, I have zero issues, so it doesn't seem to be a carb only issue. This has been happening off and on for awhile, but now it's every time I drive it in the cold.

I did replace the plugs and thermostat recently, but this happened before and after that.

Thanks!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
willspin
1st Generation Specific (1979-1985)
21
01-14-18 12:31 PM
johnstan
1st Generation Specific (1979-1985)
6
01-13-11 10:11 AM
stuffy8791
1st Generation Specific (1979-1985)
1
02-03-07 09:55 PM
thereisntanyonehere
1st Generation Specific (1979-1985)
3
12-22-05 12:06 PM
asherwood
2nd Generation Specific (1986-1992)
23
03-27-05 12:56 PM



Quick Reply: Carb issue and no access to manual



All times are GMT -5. The time now is 11:08 PM.