cai on 1st gen
06-20-05, 04:11 PM
#1
THE -7- CAN'T LOSE!
Thread Starter
Join Date: Mar 2005
Location: USA
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
cai on 1st gen
What is the best location for a cold air intake on a 1st gen?
I'm considering cutting a hole in the cowling and running ducting, putting a cai on, cutting a vent in the hood or popping the hood up about an inch.
I'm considering cutting a hole in the cowling and running ducting, putting a cai on, cutting a vent in the hood or popping the hood up about an inch.
06-20-05, 04:55 PM
#3
Too old to act my age
Join Date: Feb 2005
Location: Tulsa, Ok.
Posts: 3,164
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bwaits
I have often thought about pulling air from that big useless space where the windshield wiper motor and arms are mounted.
-billy
-billy
I have considered the same, but then I would not be able to use the beautiful rotor design air cleaner cover I got from you............
06-21-05, 07:12 AM
#7
Man......That is SEXY!!!!!
-billy
-billy
Originally Posted by Rogue_Wulff
That is actually a good plan. The area in front of the windshield is a "high pressure" area, and is fairly protected from the under hood heat.
I have considered the same, but then I would not be able to use the beautiful rotor design air cleaner cover I got from you............
I have considered the same, but then I would not be able to use the beautiful rotor design air cleaner cover I got from you............
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
demetlaw
3rd Generation Specific (1993-2002)
6
10-02-15 06:22 PM